A Robust Control Strategy for the Automatic Load Commutation Device Considering Uncertainties of Source and Load
Yicheng Wang,Zhenyue Chu,Guang Chen,Tianhan Zhang,Yuanqian Ma,Changming Chen,Zhenzhi Lin
DOI: https://doi.org/10.3390/app13137390
2023-01-01
Applied Sciences
Abstract:The long-term three-phase imbalance in distribution systems can lead to increased energy losses during transmission, reduced efficiency in energy utilization, and have serious implications for power supply security, power quality, and economic operations of the power system. The automatic load commutation device is an automatic device designed to address the issue of three-phase load imbalances in low-voltage distribution networks. By adjusting the phase of users without interrupting the power supply, this automatic device evenly distributes the load across all phases and effectively resolves the three-phase imbalance problem. Therefore, aiming at the above issue, a robust optimization method is adopted to address the control problem of automatic load commutation devices for a low-voltage distribution network. First, using historical data from photovoltaic and wind power generation systems as well as user load, a forecast analysis is conducted and uncertainty models for renewable energy and load demand are established. Then, a robust control strategy for the automatic load commutation device is proposed, which considers uncertainties of both source and load using the robust optimization method. The proposed model is then linearized using second-order cone technology and strong dual theory, and the column-and-constrained generation (C & CG) algorithm is employed to solve the problem iteratively. Finally, a modified IEEE 33-bus system is taken to verify the effectiveness of the proposed strategy. The simulation results show that the proposed load commutation device robust control model can enhance the ability of the distribution network to respond to load demand and renewable energy fluctuations while ensuring the economic operation of the distribution network. In addition, by adjusting the deviation amount and uncertainty parameters of load demand and renewable energy, a good balance between the robustness and economy of the proposed model can be achieved.