Abstract:In‐situ polymerization modified calcium sulfate whiskers and their application in PP composites research. Calcium sulfate whiskers (CSW) exhibit significant surface polarity and high surface energy, leading to aggregation when directly incorporated into polymer matrices, significantly affecting the mechanical properties of the composites. Sodium oleate (SO) was used to modify CSW, introducing –C=C– active groups on the surface, followed by in‐situ graft polymerization of sodium oleate‐modified CSW (SO‐CSW) with methyl methacrylate (MMA) to prepare CSW‐g‐PMMA composites. The modification mechanism of SO and PMMA on CSW, as well as the surface modification effects on CSW, were studied using DRIFT, XRD, XPS and TEM. The results show that oleic acid ions adsorb onto the surface of CSW in two forms. One is chemisorption, in which the oleic acid ions are adsorbed on the calcium ions site on the surface of CSW in a bridging way. The other is physical adsorption, oleic acid ions and dissolved calcium ions in the form of precipitation adsorbed on the outermost layer of CSW. After in‐situ polymerization, PMMA was successfully grafted onto the surface of CSW, and the thickness of the surface PMMA coating layer was approximately 67 nm. CSW‐g‐PMMA was used as a filler in the melt blending with polypropylene (PP) to prepare PP composites. CSW‐g‐PMMA mainly toughens and enhances the mechanical properties of PP composites in the form of crack bridging, crack deflection and pull‐out effect. Highlights The mechanism of sodium oleate modified calcium sulfate whisker (CSW) has been investigated. One is chemical adsorption that the oleic acid ions are adsorbed on the calcium ions site on the CSW surface in a bridge way. The other is physical adsorption that oleic acid ions and dissolved calcium ions are adsorbed in the form of precipitation on the outer layer of CSW. After the modification of sodium oleate, the active group –C=C– was introduced on the surface of CSW, and then the PMMA long chain polymer was grafted with an in‐situ polymerization to form a PMMA coating layer with a thickness of about 67 nm, which significantly improved the hydrophobicity of CSW surface. After modification with sodium oleate and PMMA grafting, the modified CSW significantly toughened and enhanced the mechanical properties of PP composites in the form of crack bridging, crack deflection and pull‐out effect.

Structure and properties of isotactic polypropylene/magnesium salt whisker composites

Studies of the Toughness and Reinforcement of PP/Magnesium Hydrate Whisker/POE Composites

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Exploring the Effects of MXene on Nonisothermal Crystallization and Melting Behavior of Β-Nucleated Isotactic Polypropylene

Preparation of Magnesium Hydroxide Sulfate Whisker-Phenolic Resin Composite by In-Situ Polymerization Technique and Its Properties

Simultaneously Improving The Toughness, Flexural Modulus And Thermal Performance Of Isotactic Polypropylene By Alpha-Beta Crystalline Transition And Inorganic Whisker Reinforcement

Influence of magnesium and calcium sulfate whisker on crystallization characteristics of poly (butylene adipate-co-terephthalate) and Poly(butylene succinate)

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

THE STUDY OF APPLIED BEHAVIOR OF PP/PA6 BY USING GRAFTED POLYPROPYLENE AS COMPATILIZER

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Crystallization Behavior and Thermal Properties of PP/MgAl LDH Nanocomposites Prepared in Non-polar Solution

Preparation of Calcium Sulfate Hemihydrate and Application in Polypropylene Composites

Mechanical properties, thermal stability, and thermal degradation kinetics of silicone rubber/ethylene‐vinyl acetate copolymer/magnesium sulfate whisker composites compatibilized by ethylene‐acrylic acid copolymer

In‐situ polymerization modified calcium sulfate whiskers and their application in PP composites research

Morphology and Mechanical Behavior of Isotactic Polypropylene (ipp)/syndiotactic Polypropylene (spp) Blends and Fibers

Relationship between molecular structure, crystallization behavior, and mechanical properties of long chain branching polypropylene

Fabrication, Crystalline Behavior, Mechanical Property and In-Vivo Degradation of Poly(l–lactide) (PLLA)–Magnesium Oxide Whiskers (MgO) Nano Composites Prepared by In-Situ Polymerization