Abstract:We report a temperature measurement method based on fixed wavelength transmission intensity of long-period fiber grating. Relative to wavelength or edge filtering, this method has obvious advantages in measurement accuracy and cost. The relationship between the transmission intensity and temperature at a fixed wavelength is simulated based on the theory of long-period fiber grating coupling mode. The results show that the transmission intensity of the fixed wavelength is linearly related to the temperature with the appropriate parameters. In the experiment, the transmission spectrum shows two resonant peaks at 1485 and 1538 nm. Two fixed wavelengths at 1480.4 and 1549.7 nm were selected, and the results show a linear relationship between transmission intensity and temperature. The temperature sensitivity of the transmission intensity at 1480.4 nm is about 0.0544 dB / ° C, which means the value of I1480.4 nm / I0 changes by 1.3% for every 1°C. To eliminate the influence of light source and enhance the measurement sensitivity, the ratio of the transmission intensity of two fixed wavelengths was selected to carry out the temperature measurement. The temperature sensitivity of the ratio of I1480.4 nm / I1549.7 nm was 0.0729 dB / ° C, that is, the light intensity ratio changed by 1.7% when the temperature changed by 1°C. A more reasonable design of long-period fiber grating and a more appropriate selection of fixed wavelength should be able to obtain higher temperature sensitivity.

Thermal properties analysis of BDK doped polymer optical fiber gratings

THE THERMAL OPTICAL PROPERTIES OF POLY (METHYL METHACRYLATE) SOLID FILMS DOPED BY AZO DYES

Temperature Stability of High Ge-doped Fibre Bragg Grating

Temperature-induced Reversible Changes in the Spectral Characteristics of Fiber Bragg Gratings

Method for temperature measurement of taper long-period fiber Bragg grating

Study on the doped crystal fiber high-temperature sensor

Excellent Thermal Stability of Optical Fiber Grating Inscribed on Thermosetting Silicone

Temperature and Pressure Sensing Characteristics on Panda Polarization-Maintaining Fiber Bragg Grating

Thermal decay characteristics of strong fiber Bragg gratings showing high-temperature sustainability

Study on the photosensitivity of birefringent grating in copolymer optical fiber with high concentration

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

Temperature sensing of π-PSFBG with ITO film coated by PLD method

Temperature Sensing Of Stepped-Metal Coated Optical Fiber Bragg Grating With The Restructured Dual-Peak Resonance

Photosensitive polymer-based micro-nano chirped long-period fiber gratings for temperature sensing

Direct Bragg Grating Inscription in Single Mode Step-Index TOPAS/ZEONEX Polymer Optical Fiber Using 520 nm Femtosecond Pulses

Toward Commercial Polymer Fiber Bragg Grating Sensors: Review and Applications

Thermally aggravated photo-bleaching of BAC-Al in bismuth/erbium co-doped optical fiber

FBGs in Bi-Ge Co-doped Photosensitive Fibre for High Temperature Measurement Up to 1000ºc

1200°C high-temperature distributed optical fiber sensing using Brillouin optical time domain analysis

An Optical Fiber Tip Micrograting Thermometer

A Compact First-Order Bragg Grating in a Tapered Fiber Probe for High Temperature Sensing