Abstract:<p>Clinical applications of orthopedic implants require porous structure and hydroxyapatite for osseointegration and osteoinductivity. Nevertheless, contents of hydroxyapatite (HA) and high porosity will degenerate mechanical and corrosion properties of implants. Therefore, a novel function-structure-integrated (Ti–Nb–Zr)/(Ti-HA) composites with high strength, activity and porosity and low elastic modulus consisting of a high dense Ti–13Nb–13Zr core and an external micro- and macro-porous Ti-HA part were designed and fabricated. The central compact Ti–Nb–Zr alloy provides excellent mechanical properties, while the external part with appropriate characteristics of porous structure and bioactive HA, which enhances bioactivity and provides low elastic modulus. The relative density of Ti–Nb–Zr part was 92%, and the porosity of radial Ti-HA part were between 35.3% (5 wt% HA) and 40.1% (20 wt% HA). The compressive strength of composites exhibits a remarkable improvement from 248 to 421 MPa and the elastic modulus from 10.8 to 18.9 GPa. Bioactive HA and specific pores characteristics induced bone-like apatites to deposit on porous part. The homogeneity and thickness of bioactive apatite layer on composites were enhanced with the increase of HA contents. Experimental results of bone mesenchymal stem cells (BMSCs) proliferation, the HA and the pore structure make the (Ti–Nb–Zr)/(Ti-HA) exhibited good cell activity and extensibility to BMSCs. This research would offer a potential strategy for designing and preparing function-structure-integrated orthopedic implants.</p>

Research of Porous Ti/HA Bio-Composite Fabricated by Powder Metallurgical Method

Porous Ti/HA biocomposites for biomaterial applications

Fabrication and Characterization of Titanium-Matrix Composite with 20 Vol% Hydroxyapatite for Use As Heavy Load-Bearing Hard Tissue Replacement

Fabrication and Characterization of Hydroxyapatite Reinforced with 20 Vol % Ti Particles for Use As Hard Tissue Replacement.

In vivo bioactivity of Ti/HA biocomposites fabricated by powder metallurgy methods

Function-structure-integrated Ti-HA coatings on TiNbZr with enhanced mechanical properties and bioactivity prepared by spark plasma sintering

Preparation and Characterization of Bio-Medical Porous Titanium by Unconventional Powder Metallurgy

Fabrication and Characterization of Bioactive Porous Titanium

Preparation and bioactive surface modification of the microwave sintered porous Ti-15Mo alloys for biomedical application

Mechanical and Corrosion Properties of Ti-35Nb-7Zr- X HA Composites Fabricated by Spark Plasma Sintering

Fabrication and Compressive Properties of Porous Ti6Al4V Alloy with Elongated Pores for Biomedical Application

Fabrication of Porous Titanium with Biomechanical Compatibility

Microstructure and Properties of Ti35Nb2.5Sn5HA Biocomposites by Powder Metallurgy and Sintering

Biomedical Porous Tinbzrfe Alloys Fabricated Using Nh4hco3 As Pore Forming Agent Through Powder Metallurgy Route

Effects of Sn Content on the Microstructure, Mechanical Properties and Biocompatibility of Ti–Nb–Sn/hydroxyapatite Biocomposites Synthesized by Powder Metallurgy

Mechanical and Biological Properties of Hydroxyapatite Reinforced with 40 Vol. % Titanium Particles for Use As Hard Tissue Replacement.

Fabrication of Porous N-Ha/Pa66 Composite for Bone Repair

Tribological behavior and in vitro biocompatibility of powder metallurgical Ti–15Mo/HA composite for bone repair

Preparation method and application of titanium boride alloy/hydroxyapatite composite material

Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity

Fabrication and compressive properties of Ti6Al4V implant with honeycomb-like structure for biomedical applications