Abstract:Diamond-incorporated copper metal matrix layers were fabricated on brass substrates by using electrodeposition technology in this study. To improve the adhesion of the composite coatings on the brass substrate, a plated copper was applied as the interlayer between the multilayers and the substrate. The surface morphologies of the interlayer and the diamond-incorporated copper composite layers were studied by scanning electron microscopy. The effect of the copper interlayer on the incorporation and the distribution of the diamond content in the coatings was analyzed by surface roughness, electrochemical impedance spectroscopy, and cyclic voltammetry. The diamond content of the composite coating was measured by energy-dispersive X-ray. The film thickness was evaluated by the cross-sectional technique of focused ion beam microscopy. The element, composition, and crystallization direction of diamond with Cu matrix was measured by X-ray diffraction and transmission electron microscope. The adhesion of the multilayers was studied by scratch tests. The experiment results indicated that the diamond content and distribution of the coating were higher and more uniform with the Cu interlayer than that without one. The plated copper interlayer reduced the electrical double-layer impedance and enhanced the adsorption of diamond particles by the surrounding Cu ions, which promoted the diamond content in the composite coatings. The roughened surface caused by the plated Cu interlayer also improved the substrate's mechanical interlock with the composite coating, which contributed to the strong adhesion between them.

Cvd Diamond Film Deposited on Copper Substrate Enhanced by A Thin Platinum Modification Layer

Direct copper plating on ultra-thin sputtered cobalt film in an alkaline bath

Preparation and characterization of diamond film on Cu substrate using Cu-diamond composite interlayer

Improved interfacial adhesion between diamond film and copper substrate using a Cu(Cr)-diamond composite interlayer

Diamond coatings on copper surfaces through interface engineering

Fabrication and Characterization of Cu-Diamond Composite Layer on CuCr0.5 Substrate

Fabrication of Inlay Structure Diamond Films on Cu Substrate and the Evaluation of Adhesion Strength

Electroless Deposition of Copper and Fabrication of Copper Micropatterns on CVD Diamond Film Surfaces

Growth of Nanocrystalline Diamond Films on Co-Cemented Tungsten Carbide Substrates by Hot Filament CVD

Deposition of diamond film on ferrous alloys substrate with Au/Cu interlayer by hot-filament chemical vapor deposition

Preparation of Thick Cvd Diamond Film on Copper Substrate

Deposition of Diamond Film on Ferrous Alloys Substrate with Au/Cu Interlayer by HFCVD

Facile electroless copper plating on diamond particles without conventional sensitization and activation

Film-Forming Mechanism of Inlay Structure Diamond Growth

Multilayer Diamond‐Like Carbon Films on Monocrystalline Diamond

Characteristics of Diamond Crystals Deposited on Quartz Substrates by Chemical Vapor Deposition

Morphologies and structures of chemical vapor deposited diamond films and film-substrate interfaces

Study on deposition and characterization of diamond coated cylinder-shaped substrate

Improvement of the Adhesion and Diamond Content of Electrodeposited Cu/Microdiamond Composite Coatings by a Plated Cu Interlayer

Preparation and Field Emission Property of Nanodiamond-Cluster-embedded Diamondlike Carbon Film

Uniform Deposition of Chemical Vapor Deposition Diamond Films on Slender Tungsten Wires