Abstract:Passive isolation has been widely accepted as an effective means for the protection of structures against seismic hazards. The isolation bearings, typically placed at the base of the structure, increase the flexibility of the structure and shift its fundamental frequency away from the dominant frequency of seismic excitations, resulting in significantly reduced interstory drifts and floor accelerations. During severe earthquakes, the performance of passive isolation systems is usually achieved at the expense of having large base displacements. Alternatively, active isolation combines isolation bearings with adaptive actuators to effectively mitigate the base displacements, while maintaining reasonable interstory drifts and floor accelerations. Despite successfully theoretical proof documented in previous studies, most experimental implementations only verified active isolation with unit-axial actuators under unidirectional excitations. Earthquakes are intrinsically multidimensional, resulting in out-of-plane responses such as torsional responses. Therefore, the focus of this paper is the development and experimental verification of active isolation strategies for multistory buildings subjected to bidirectional earthquake loadings. First, a model building is designed to be dynamically similar to a representative full-scale structure. The selected isolation bearings feature low friction and high vertical stiffness, providing stable behavior. In the context of the multidimensional response control, three custom-manufactured and appropriately scaled actuators are employed to mitigate both in-plane and out-of-plane responses. In addition, the structure is subjected to multi-directional earthquake ground motion. To obtain a high-fidelity model of the active isolation systems, the authors propose a hybrid identification approach, which combines the advantages of the lumped mass model and nonparametric methods. Control-structure interaction is also included in the identified model to further enhance the control authority. By employing the H-2/LQG control algorithm, the controllers for the hydraulic actuators are shown to offer high performance and good robustness. Active isolation is found to possess the ability to reduce base displacements and produce comparable accelerations and interstory drifts to passive isolation. The proposed active isolation strategies are validated experimentally for a six-story building tested on the six-degree-of-freedom shake table in the Smart Structures Technology Laboratory at the University of Illinois at Urbana-Champaign. Copyright (c) 2013 John Wiley & Sons, Ltd.

Experimental Study on Vertical Performance of Multidimensional Earthquake Isolation and Mitigation Devices for Long-Span Reticulated Structures

Structural Isolation and Mitigation Technology under Multi-Dimensional Earthquake Excitations

Remote Hybrid Testing of Asymmetric Structures under Earthquake Excitation

Horizontal Shaking Table Tests on a Four-Story Prototype Structure Using Multi-Dimensional Earthquake Isolation and Mitigation Devices

Seismic analysis of two typical spatal structures under multi-support vertical excitations

Full-scale Steel Column Tests under Simulated Horizontal and Vertical Earthquake Loadings

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Test, Modeling, and Vibration Control of a Novel Viscoelastic Multi-Dimensional Earthquake Isolation and Mitigation Device

Experimental research and numerical simulation of a large-span isolated structure considering multi-dimensional input effects

Analysis model for long-span isolated structure subjected to multi-support earthquake excitations

Shaking Table Tests on the Multi-Dimensional Seismic Response of Long-Span Grid Structure with Base-Isolation

Error Study of Displacement Model for Seismic Analysis of Long-Span Structures Subjected to Multi-Support Earthquake Excitations

Experimental and numerical studies of a novel three-dimensional isolation device incorporating disc springs with U-shaped dampers

Performance of a passive rate‐independent damping device in a seismically isolated multistory building

Seismic response analysis of super-high-rise building structures with three-layer isolation systems

Research on Earthquake Resistance Behavior of a Long-Span and Cantilevered Structure Subjected to Vertical Motion

Seismic performance improvement of a three-dimensional isolated spherical reticulated shell structure using pseudo-negative-stiffness magnetorheological dampers

Multiaxial Active Isolation for Seismic Protection of Buildings

Research on Earthquake Resistance Behavior of R/C Frame Structures Subjected to Vertical Motion

Seismic performance of a novel 3D isolation system on continuous bridges

Experimental study on seismic performance of super high-rise building with topology optimized diagonal mega frame