Abstract:In the design of fusion reactors, determining radiation levels due to neutrons and photons (gammas) throughout the reactor and its surroundings is important. Radiation transport codes need to have accurate cross-section libraries in order to produce accurate results. The Fusion Evaluated Nuclear Data Library (FENDL) is an international effort coordinated by the International Atomic Energy Agency, Nuclear Data Section, that assembles a collection of the best nuclear data for fusion applications. In the current FENDL-3.1d data library, neutron cross sections for 65 of the 180 isotopes present in the library come from ENDF/B-VII.1.Monte Carlo–based neutronics calculations using cross-section libraries from FENDL (versions 2.1 and 3.1d), ENDF/B (versions VII.1 and VIII.0), and candidate new evaluations for key structural elements/isotopes such as iron and chromium were performed. The calculations were performed in reactor-relevant models including a one-dimensional (1-D) cylindrical model of ITER, a three-dimensional (3-D) computer-aided design (CAD)–based model of ITER, and a 3-D CAD-based model of the U.S. Fusion Energy System Studies Fusion Nuclear Science Facility (FNSF).The results show that neutron fluxes calculated with different cross-section libraries can be as much as 12% higher and as much as 8% lower than those calculated with the reference cross-section library (FENDL-2.1). Nuclear heating calculated with different cross-section libraries can be as much as 14% higher and as much as 8% lower than those calculated with the reference cross-section library. Iron displacements per atom calculated with different cross-section libraries can be as much as 9% higher and as much as 9% lower than those calculated with the reference cross-section library. Helium production calculated with different cross-section libraries can be as much as 19% higher and as much as 2% lower than those calculated with the reference cross-section library. Tritium production in the ITER 1-D model's nonbreeding regions calculated with different cross-section libraries can be as much as 246% higher and as much as 5% lower than those calculated with the reference cross-section library. The tritium breeding ratio in the FNSF 3-D model calculated with different cross-section libraries averaged 1% higher at the inboard and 1.4% higher at the outboard than those calculated with the reference cross-section library.

The In-situ Neutronics Calculation of NFM in the ITER

Modelling of the NBI contribution to the neutron energy spectra for the ITER Vertical Neutron Camera

ITER full model in MCNP for radiation safety demonstration

Comparison analysis of 1D/2D/3D neutronics modeling for a fusion reactor

Nuclear analyses for the ITER Diagnostic Equatorial Port 8

Investigation on the Tritium Self-Sufficiency and Neutron Shielding Based on a Water-Cooled Blanket for CFETR at 1.5 GW

Application and Validation of an Improved One-to-Many Method to CFETR Neutronics Modeling

Neutronic analysis of IFMIF-DONES test cell cooling system

Neutronic Analysis of Ifmif High Flux Test Module for High Temperature Irradiation

Neutronics Analysis of the ITER In-Vessel Viewing System

Impact of fusion reactor neutronics modeling for transmutation and thermal feedback

Development of a Wide-Range Neutron Flux Monitoring System in EAST

Use of MCNP to Simulate Nuclear Detection of Inertial Confinement Fusion

Neutronics simulations for the design of neutron flux monitors in SPARC

Neutronics Calculations to Support the Fusion Evaluated Nuclear Data Library (FENDL)

Thermal-to-fusion Neutron Convertor and Monte Carlo Coupled Simulation of Deuteron/triton Transport and Secondary Products Generation

Measurements of ITER Fusion Power by Neutron Flux Monitors

Nuclear analyses for the integration of ITER equatorial Port 2

Preliminary Neutronics Analyses of China Dual-Functional Lithium-Lead (DFLL) Test Blanket Module for CFETR

Simulation of in-core neutron monitoring with U-235 micro fission chamber for CiADS-like LFR

OVERVIEW OF NEUTRON MEASUREMENTS IN JET FUSION DEVICE