Abstract:Ductile Nb particles have been applied to toughen TiAl-based intermetallic alloys due to the positive effects of the Nb element on their mechanical and processing properties. However, the room-temperature (RT) fracture toughness of powder metallurgical (PM) TiAl–Nb composites needs further improvement to avoid micro-cracks in complex components prepared by PM near-net shape technologies. Herein, a facile heat treatment—annealing in the (α+γ) phase region for a short duration and air-cooling—was applied to strengthen and toughen a PM TiAl–Nb composite. The phase and microstructure evolution of the PM composite during annealing, and their effects on mechanical properties and fracture behaviors, were investigated specifically. It is found that after annealing, the volume fraction of α 2 phase increased markedly, while that of the B2 phase decreased significantly, and the Nb solid solution (Nb ss ) phase almost completely disappeared; the microstructures of the TiAl–Nb composite became significantly finer and more uniform overall, and the microstructure type of the TiAl matrix transformed from near-gamma (NG) to duplex (DP). Both the RT tensile strength and fracture toughness of the TiAl–Nb composite improved markedly after annealing. The strengthening mechanisms for the as-annealed composite were primarily based on the phase and microstructure evolution. The toughening mechanisms for the as-annealed composite included the generation of shear ligaments, delaminations, crack deflection and branching. The improvement in tensile strength and the reduction in work-hardening exponent made the composite tougher through facile annealing. The incorporation of Nb particles and further heat treatment can efficiently facilitate the improvement in fracture toughness of PM TiAl-based alloy.

Effects of Annealing on Microstructure and Mechanical Properties of Nano-Grained Titanium Produced by Combination of Asymmetric and Symmetric Rolling

Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets

Effect of Annealing Time on Microstructure and Mechanical Properties of Cold-Roled Niobium and Titanium Bearing Micro-aloyed Steel Strips

Influence Of Annealing Temperature On Film Morphology And Tribological Performance Of Tisin-Ag Coating

Static globularization and grain morphology evolution of α and β phases during annealing of hot-rolled TC21 titanium alloy

Static Recrystallization Behavior and Texture Evolution during Annealing in a Cold Rolling Beta Titanium Alloy Sheet

Effect of Post-ECAP Annealing on the Microstructure and Mechanical Properties of Commercially Pure Titanium

Evolution of microstructure and mechanical properties during short-time annealing of a hard-plate rolled 2 vol% TiC p /near-β titanium matrix composite

Effects of Annealing Temperature on Microstructural Evolution and Mechanical Properties in Cold-Rolled High-Nitrogen Austenitic Steel

Effect of annealing treatment on the microstructure and mechanical properties of bulk nanostructured Ti/AZ61 composites prepared by hot pressing

The Effect of Annealing Treatment on the Microstructure and Texture of a Cold-Rolled TiNiFe Shape Memory Alloy Tube

Significant annealing-induced hardening effect in nanolaminated-nanotwinned (CrCoNi)97.4Al0.8Ti1.8 medium-entropy alloy by severe cold rolling

Microstructural evolution during annealing of a powder metallurgical TiAl–Nb composite and its effect on mechanical properties

Microstructure Evolution, Mechanical Properties, and Corrosion Resistance of Hot Rolled and Annealed Ti-Mo-Ni Alloy

Effect of Cold Rolling and Heat Treatment on Microstructure and Mechanical Properties of Pt-0.7Ti Microalloy

Microstructure evolution and recrystallization of Ti6246 alloy in hot‐rolling and annealing processes

Effect of Heat Treatment on Microstructure and Mechanical Behavior of Ultrafine-Grained Ti-2Fe-0.1B

The effect of crystallographic orientation on globularization and texture evolution during the annealing of a near α titanium alloy tube

Microstructures and Mechanical Properties of a Commercial Pure Zirconium during Rolling and Annealing at Different Temperatures

Influence of annealing on NiTi shape memory alloy subjected to severe plastic deformation

Annealing Behavior of Nanostructured Aluminum Produced by Cold Rolling to Ultrahigh Strains