Abstract:Bamboo is a kind of a green renewable traditional building material with the advantages of high tensile strength parallel to grain and fast growth, which can meet the development needs of green and ecological fabricated buildings. However, the round bamboos are likely to crack under pressure, especially at the bottom of the column and bolted bamboo joint, because of stress concentration. To solve the above problems, glass fiber reinforced polymer (GFRP) was used to strengthen the natural bolted bamboo joints in this study. Then shear tests and pressure tests were carried out in order to find an effective way to improve the compression resistance capability of the bamboo column and shear behavior of bolted bamboo joint. The bearing capacity and failure modes were observed and studied. Compared with the specimens without reinforcement, the maximum deformation capacity of the GFRP reinforced bamboo column specimens is increased by at least 2.5 times, and the bearing capacity is increased by 5.5%-11.7%; the maximum deformation capacity of the GFRP reinforced bamboo joint specimens is increased by at least 2.5 times, and the bearing capacity is increased by 3-6 times. Therefore, GFRP is a kind of material which can greatly improve the deformation and bearing capacity of bamboo column or bolted bamboo joint. In addition, GFRP can prevent brittle failure and improve ductility of specimens.Although the bearing capacity of GFRP reinforced bamboo joints has been greatly improved compared with that without reinforcement and the stress has also been greatly enhanced, the maximum load that the bamboo joint can bear is still far lower than that of the bamboo column due to the lack of bearing area. How to make full use of the bearing capacity of bamboo in addition to the node is the key point to be solved in the future, one suggestion is to add fillers to bamboo joints.

Experimental Study on Carbon Fiber Polymer Reinforced Bamboos

Performances of carbon fiber cloth reinforced bamboos

Role of Alkali Treatment on Mechanical and Thermal Properties of Bamboo Particles Reinforced Polyvinylchloride Composites

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Experimental Research on Bamboo Fiber Reinforced Concrete

Experimental Study on Mechanical Performance of Bamboo Fiber Reinforced Concrete

Experimental and Analytical Investigations on Short-Term Behavior of Glubam-Concrete Composite Beams

Bamboo strengthened with carbon fiber reinforced polymer for the substitutes of steel substructures

Experimental Study on Uniaxial Compression of Bamboo Poles with Different Reinforcements

Experimental Study on Mechanical Properties of Bamboo Culms and Joints Reinforced with GFRP Sheets

Experimental Investigations on the Mechanical Properties of Bamboo Fiber and Fibril

Performance of Bamboo Fiber Reinforced Composites: Mechanical Properties

Structural and mechanical properties of bamboo fiber bundle and fiber/bundle reinforced composites: A review

Experimental Study and Numerical Analysis on the Shear Resistance of Bamboo Fiber Reinforced Steel-Wire-Mesh BFRP Bar Concrete Beams

Axial compressive performance of laminated bamboo column with aramid fiber reinforced polymer

Preparation and Performance of Cement Mortar Reinforced by Modified Bamboo Fibers

Flexural Behavior of Hybrid Composite Beams with a Bamboo Layer and Lattice Ribs

Research progress on bamboo fiber reinforced polymeric composites: Processes, properties, and future directions

Synergistic in-situ reinforcement of lignin and adhesive for high-performance aligned bamboo fibers composites

Morphological aspects and mechanical properties of single bamboo fibers and flexural characterization of bamboo/ epoxy composites

Sustainable high-strength and dimensionally stable composites through in situ regulation and reconstitution of bamboo-derived lignin and hemicellulose contents