Abstract:Bamboo is a kind of a green renewable traditional building material with the advantages of high tensile strength parallel to grain and fast growth, which can meet the development needs of green and ecological fabricated buildings. However, the round bamboos are likely to crack under pressure, especially at the bottom of the column and bolted bamboo joint, because of stress concentration. To solve the above problems, glass fiber reinforced polymer (GFRP) was used to strengthen the natural bolted bamboo joints in this study. Then shear tests and pressure tests were carried out in order to find an effective way to improve the compression resistance capability of the bamboo column and shear behavior of bolted bamboo joint. The bearing capacity and failure modes were observed and studied. Compared with the specimens without reinforcement, the maximum deformation capacity of the GFRP reinforced bamboo column specimens is increased by at least 2.5 times, and the bearing capacity is increased by 5.5%-11.7%; the maximum deformation capacity of the GFRP reinforced bamboo joint specimens is increased by at least 2.5 times, and the bearing capacity is increased by 3-6 times. Therefore, GFRP is a kind of material which can greatly improve the deformation and bearing capacity of bamboo column or bolted bamboo joint. In addition, GFRP can prevent brittle failure and improve ductility of specimens.Although the bearing capacity of GFRP reinforced bamboo joints has been greatly improved compared with that without reinforcement and the stress has also been greatly enhanced, the maximum load that the bamboo joint can bear is still far lower than that of the bamboo column due to the lack of bearing area. How to make full use of the bearing capacity of bamboo in addition to the node is the key point to be solved in the future, one suggestion is to add fillers to bamboo joints.

Experimental Research on Bamboo Fiber Reinforced Concrete

Experimental Study on Mechanical Performance of Bamboo Fiber Reinforced Concrete

Experimental and Analytical Investigations on Short-Term Behavior of Glubam-Concrete Composite Beams

Experimental evaluation of fracture toughness of bamboo fiber reinforced high performance lightweight aggregate concrete

Research on Strengthening Mechanism of Bamboo Fiber Concrete under Splitting Tensile Load

Experimental Study and Numerical Analysis on the Shear Resistance of Bamboo Fiber Reinforced Steel-Wire-Mesh BFRP Bar Concrete Beams

Flexural performance of bamboo fiber‐reinforced concrete mixed with seawater and sea sand

Experimental Study on Basic Mechanical Properties of Basalt Fiber Reinforced Concrete

RESEARCH ON FLEXURAL BEHAVIOR OF RC BEAMS STRENGTHENED WITH BASALT FIBER REINFORCED POLYMER

Experimental Study on Mechanical and Durability Properties of Glass and Polypropylene Fiber Reinforced Concrete

Experimental study on mechanical behavior of PE fiber cementitious composite

Experimental Study on Uniaxial Compression of Bamboo Poles with Different Reinforcements

Performance of Bamboo Fiber Reinforced Composites: Mechanical Properties

A review on experimental observation on structural performance of bamboo reinforced concrete beam

Flexural Behavior of Hybrid Composite Beams with a Bamboo Layer and Lattice Ribs

Preparation and Performance of Cement Mortar Reinforced by Modified Bamboo Fibers

Preparation and Properties of Natural Bamboo Fiber-Reinforced Recycled Aggregate Concrete

EXPERIMENTAL STUDY OF THE CHLORIDE-ION PERMEABILITY OF BAMBOO-FIBER-REINFORCED CONCRETE

FLEXURAL STRENGTH OF BAMBOO AND STEEL REINFORCED CONCRETE BEAM

Experimental Study on Mechanical Properties of Bamboo Culms and Joints Reinforced with GFRP Sheets

Flexural property of steel reinforced bamboo scrimber composite beam