Abstract:The incorporation of supplementary cementitious materials (SCMs) in concrete can improve the properties of concrete partially immersed in salt solution. However, the current partial immersion environment only considers the capillary action above the still water level, does not consider the capillary action above the fluctuating water level in dry-wet cycling environment. In this paper, a series of indoor exposure experiments were carried out to investigate the effects of incorporating polynary SCMs including fly ash (FA), ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the sulfate resistance and chloride impermeability of concrete considering the capillary action above the fluctuating water level in dry-wet cycling environment. A total of 15 groups of concrete with different mix proportions (total 150 concrete specimens) were designed to study the effects of different replacement levels of polynary SCMs on concrete properties. The effects of incorporating polynary SCMs on the chloride impermeability of concrete above and in the fluctuating water level zone were investigated. The scanning electron microscope (SEM), x-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) tests were used to analyze the microstructure of concrete. The results indicate that when concrete is incorporated with polynary SCMs and subjected to capillary action above the fluctuating water level, the compressive strength and chloride impermeability first increase and then decrease with the increase of FA content; the compressive strength and chloride impermeability decrease with the increase of GGBFS content; the compressive strength first increase and then decrease with the increase of SF content, and the chloride impermeability increase with that. The transport process of chloride in concrete above the fluctuating water level zone includes the longitudinal transport under capillary action and the transverse transport under concentration gradient action. The combined effects of both cause the higher chloride concentration in concrete above the fluctuating water level zone. Comprehensively considering the influence of different mix proportions on the sulfate resistance and chloride impermeability of concrete, it is determined that 20% FA + 5% SF is the optimal replacement level with the excellent performance considering the capillary action above the fluctuating water level in dry-wet cycling environment.

EXPERIMENTAL STUDY OF THE CHLORIDE-ION PERMEABILITY OF BAMBOO-FIBER-REINFORCED CONCRETE

Experimental Study On Permeability And Chloride Resistance Properties Of Concrete In Yu-Cheng Bridge

Experimental study on electrical characteristics of ions in concrete at early age under electric field

Effects of incorporating polynary SCMs on sulfate resistance and chloride impermeability of concrete considering capillary action in dry-wet cycling environment

Experimental and Numerical Study on the Microstructure and Chloride Ion Transport Behavior of Concrete-to-concrete Interface

Optimal Design and Performance of Concrete with Function Component in Marine Environment

Flexural performance of bamboo fiber‐reinforced concrete mixed with seawater and sea sand

Experimental Study on Mechanical Performance of Bamboo Fiber Reinforced Concrete

Experimental Study on Chloride Ion Transport in Concrete Structure under Shear Stress

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

Preparation and Properties of Natural Bamboo Fiber-Reinforced Recycled Aggregate Concrete

Experimental Study and Numerical Analysis on the Shear Resistance of Bamboo Fiber Reinforced Steel-Wire-Mesh BFRP Bar Concrete Beams

Preparation and Performance of Cement Mortar Reinforced by Modified Bamboo Fibers

Experimental evaluation of fracture toughness of bamboo fiber reinforced high performance lightweight aggregate concrete

Strength and Permeability Evaluation of hybrid steel –basalt fibres reinforced concrete

Chloride diffusion behavior and microstructure of basalt-polypropylene hybrid fiber reinforced concrete in salt spray environment

Experimental study on the mechanical properties and impermeability of basalt-PVA hybrid fibre reinforced concrete

The Permeability of Resistance to Chloride Ion of High Performance Concrete with Lithium Slag and Steel Slag

A Comprehensive Experimental Study on the Physical Performance and Durability of Bamboo Bio-Concrete

Mechanical and Microstructural Properties of Bamboo Fiber-Reinforced Concrete Containing a Blend of Waste Marble Powder and Waste Glass Powder