Numerical Study on the Impact of Fouling on Axial Compressor Stages

ZHANG Longxin,CHEN Shaowen,SUN Shijun,WANG Songtao,WANG Zhongqi

DOI: https://doi.org/10.13675/j.cnki.tjjs.2012.03.015

2012-01-01

Abstract:Three-dimensional numerical method has been used in an investigation of NASA stage 35 which was a typically realistic compressor stage.Firstly,the numerical model was validated against the experimental data available from literature to check accuracy of the commercially computational fluid dynamic code.Computed performance maps showed good agreement with experimental data.Then,the model was used to simulate the effect of fouling on compressor stage in terms of imposing different combinations of added thickness and surface roughness levels.As a result,with surface roughness increasing,the compressor isentropic efficiency and total pressure ratio significantly reduced,mass flow rate decreased at both choked and near stall region,and surface roughness had little effect on compressor stable operating range.When the adding thickness increased,mass flow rate had a great drop at a choked point,but different at near stall point,and compressor stable operating range reduced obviously.The augment of surface roughness on rotor passage is the main fact of performance deterioration and it needs to be investigated.