Abstract:Residual stress is a key factor affecting the properties of ceramic/metal brazed joints. In this work, the residual stress of sapphire/Ti6Al4V alloy joints brazed with CuTi+B composite filler after cooling and reheated to 400 °C was calculated by finite element numerical simulation method. The effect of the B content in the filler and the filler thickness on the residual stress distribution of brazed joints after cooling was studied. The results show that the residual stress is mainly concentrated in the area near the filler layer. The maximum von Mises stress is located in the filler layer and a large Z-axial (the direction perpendicular to the brazed surface) tensile stress is on the sapphire near the filler layer. The B content and the filler thickness have no significant effect on the distribution of residual stress, but they have a certain effect on the value of residual stress of the sapphire near the filler layer. The von Mises stress and the Z-axial stress of this area increase with the increase of B content, and they decrease first and then increases with the increase of filler thickness. When the sapphire/Ti6Al4V joint is reheated to 400 °C, its residual stress significantly reduces and the residual stress on the periphery of the filler layer changes from compressive stress to tensile stress. As the B content is 1 and 3 wt%, the sapphire/Ti6Al4V joint with a smaller residual stress can be obtained. The microstructure observation and shear tests of the joints show that cracks appear in the high stress concentration area and the fracture starts from the area with maximum axial tensile stress, which verifies the accuracy of the simulation results.

Numerical Simulation for Residual Stresses of the Spark Plasma Sintered Ti–TiB Composites

Numerical simulation on surface residual stress for titanium alloy

Numerical Analysis and Experimental Validation on Residual Stress Distribution of Titanium Matrix Composite after Shot Peening Treatment

Numerical Analysis of the Effects of Reinforcing Particles on the Residual Stress of TiB2/Al-Si Composites Fabricated by Laser Powder Bed Fusion

Integrated Numerical Simulations and Experimental Measurements for the Sintering Process of Injection-Molded Ti-6Al-4V Alloy

Numerical Simulation of the Residual Stress in Laser Beam Welded and TIG Welded Joints of Thin Plate of Titanium Alloy

Modelling and Characterisation of Residual Stress of SiC-Ti3C2Tx MXene Composites Sintered via Spark Plasma Sintering Method

Dependence of Residual Thermal Stress in Cermets on the Sintering Technique

Residual Stress Distribution in Sapphire/Ti6Al4V Alloy Joints Brazed with CuTi+B Composite Fillers

Study of residual stress in selective laser melting of Ti6Al4V

Numerical Simulation of Thermal/residual Stresses in Brazed Ti / TiAl Joints

Effects of pulse conditions on microstructure and mechanical properties of Si3N4/6061Al composites prepared by spark plasma sintering (SPS)

The Microstructure Evolution, Mechanical Properties and Densification Mechanism of Tial-Based Alloys Prepared by Spark Plasma Sintering

3D Numerical Simulation of Brazed Residual Stress in Stainless Steel Plate-Fin Structure

Numerical Simulation on Laser Shock Peening of B4C-TiB2 Composite Ceramics

Effects of Particle Size on Residual Stresses of Metal Matrix Composites

Numerical study on the warm compaction and solid-state sintering of TiC/316L composite powders from particulate scale

Process optimization, microstructures and mechanical/thermal properties of Cu/Invar bi-metal matrix composites fabricated by spark plasma sintering

Fabrication and mechanical evaluation of SiC–TiC nanocomposites by SPS

Numerical investigations on residual stresses in orthogonal cutting of Ti-6A1-4V

The Effects of Spark-Plasma Sintering (SPS) on the Microstructure and Mechanical Properties of BaTiO3/3Y-TZP Composites