Abstract:The density and surface tension of Ni‐based superalloys are measured using the maximum bubble pressure method to determine viscosity. The viscosity is evaluated using the oscillating crucible method. The fitting equations of the molten Ni‐based superalloys are as follows. 1) Alloy 65: ln(η [mPa s])=6569×(1θ [K])−1.844 ; 2) Alloy WA: ln(η [mPa s])=6097×(1θ [K])−1.621 ; 3) Alloy 720: ln(η [mPa s])=6179×(1θ [K])−1.700 ; 4) Alloy 718: ln(η [mPa s])=6344×(1θ [K])−1.724 . Accurate data on the high‐temperature thermophysical properties, which are density, surface tension, and viscosity, are indispensable for performing high‐precision casting simulations of Ni‐based superalloys. Viscosity is the most important thermophysical property for thermofluidic analysis. However, measuring the viscosity of an alloy, which is lower than that of molten glass, is difficult, and experimental viscosity data are limited. Herein, the density of Ni‐based superalloys is measured using the maximum bubble pressure (MBP) method to determine viscosity. The viscosity is evaluated using the oscillating crucible method. The surface tension is simultaneously measured using the MBP method. In these results, the average density values [kg m−3] of Alloy 65, Alloy 718, Alloy WA, and Alloy 720 are 7.52 × 103, 7.43 × 103, 7.82 × 103, and 7.52 × 103, respectively. The average surface tension values [N m−1] of Alloy 65, Alloy 718, Alloy WA, and Alloy 720 are 1.55, 1.54, 1.47, and 1.51, respectively. The fitting equations of the molten Ni‐based superalloys are as follows. 1) Alloy 65: ln(η [mPa s])=6569×(1θ [K])−1.844 ; 2) Alloy WA: ln(η [mPa s])=6097×(1θ [K])−1.621 ; 3) Alloy 720: ln(η [mPa s])=6179×(1θ [K])−1.700 ; 4) Alloy 718: ln(η [mPa s])=6344×(1θ [K])−1.724 .

Reference Data for the Density and Viscosity of Liquid Antimony, Bismuth, Lead, Nickel and Silver

Reference Data for the Density and Viscosity of Liquid Cadmium, Cobalt, Gallium, Indium, Mercury, Silicon, Thallium, and Zinc

Reference Data for the Density and Viscosity of Liquid Copper and Liquid Tin

Reference Correlation for the Density and Viscosity of Eutectic Liquid Alloys Al+Si, Pb+Bi, and Pb+Sn

Correlation of Infinite-Dilution Diffusion Coefficients in Supercritical Fluids

Reference Correlations for the Density and Thermal Conductivity, and Review of the Viscosity Measurements, of Liquid Titanium, Zirconium, Hafnium, Vanadium, Niobium, Tantalum, Chromium, Molybdenum, and Tungsten

Density and Thermal Expansion of Molten Manganese, Iron, Nickel, Copper, Aluminum and Tin by Means of the Gamma-Ray Attenuation Technique

The density of liquid silver from its melting point to its normal boiling point 2450°K

Density and Molar Volume of Liquid Amalgams of Thallium, Lead, and Bismuth

Reference Correlations for the Thermal Conductivity of Solid BK7, PMMA, Pyrex 7740, Pyroceram 9606 and SS304

Density Measurement of Different Nanofluids and Their Comparison With Theory

The measurement of viscosity of alloys—a review of methods, data and models

Viscosity of liquid Ni-based industrial alloys: experiments versus theory

Density, Surface Tension, and Viscosity of Molten Ni‐Based Superalloys Using the Maximum Bubble Pressure and Oscillating Crucible Methods

The viscosity re-assessment of the Cu–X (X = Ag, Al, Sn, Mg) and Ag–X (X = Sn, Sb, In, Au) liquid alloys

Improved Correlation for Viscosity from Surface Tension Data for Saturated Normal Fluids

Correlation of the fragility of metallic liquids with the high temperature structure, volume, and cohesive energy

Correlation for Viscosities of Pure Liquids at High Pressures

A Theoretical and Computational Study of Structure‐Property Relationship in Five Binary Liquid Alloys

Liquid Density Measurement of N-Decane with a Random Temperature Signal Cross-Correlation Densimeter at High Temperatures and Pressures

Measurement and calculation of the viscosity of metals—a review of the current status and developing trends