Abstract:Journal of Sandwich Structures &Materials, Ahead of Print. The hybridization technique has recently been used to produce a new generation of composites called pseudo-ductile composites, which have shown higher failure strain compared to conventional composites, minimizing the risks of the occurrence of a catastrophic failure. The pseudo-ductility behavior in these composites is obtained by hybridization of fibers with high and low failure strains. In this study, a multi-scale finite element (FE) model incorporating micro and macro-scales is proposed to predict the failure behavior of pseudo-ductile composites. A micro-scale representative volume element (RVE), consisting of randomly distributed fibers, was generated using a Python code. Periodic boundary conditions (PBCs) were applied to the RVE generated with a periodic geometry. To account for fiber failure and ply fragmentation, the tensile strength of fibers was distributed based on the Weibull distribution function and a user-defined UMAT subroutine was developed. Tensile loading was then applied to the RVE to simulate the composite's mechanical behavior. For validation, an RVE was developed based on experimental data from recent research on thinply and conventional thickness composites. Numerical results were compared to experimental data, demonstrating acceptable agreement. In the final step, following a sequential multi-scale modeling approach, a macro-scale model was constructed based on the outputs of the micro-scale model subjected to tensile and shear loads. The results were compared with experimental data, revealing good agreement. The proposed model allows for the optimization of pseudo-ductile composite structures to achieve a desired set of mechanical properties without the need for conducting extensive experimental material tests.

Prediction of the mechanical behavior of fiber-reinforced composite with domain decomposition method

Evaluating the Mechanical Behavior of 2D Woven Fabric Composite by Domain Decomposition Method

The Strength Prediction of Composite Laminates Based on a Quasi-3D Finite Element Models

Simulation of Fiber Reinforced Composite Materials Mold Filling Process and Mechanical Properties Analysis

Investigation on A Direct Modeling Strategy for the Effective Elastic Moduli Prediction of Composite Material

Multiscale Simulation of Debonding in Fiber-Reinforced Composites by a Combination of MsFEM and XFEM

Large Scale Analysis of Mechanical Properties in 3-D Fiber-Reinforced Composites Using a New Fast Multipole Boundary Element Method

Micromechanical Predictions on Elastic Moduli of a Short Fiber Composite with Arbitrary Geometric Combination

Elastic Moduli Prediction of a Short Fiber Composite with Interface Debonding at Fiber Ends

A mechanics-informed machine learning approach for modeling the elastoplastic behavior of fiber-reinforced composites

Prediction of the failure behavior of pseudo-ductile composites using a multi-scale finite element model

Multi-scale Numerical Calculations for the Interphase Mechanical Properties of Carbon Fiber Reinforced Thermoplastic Composites

Predicting strength of fibrous laminates under triaxial loads only upon independently measured constituent properties

Prediction of the Biaxial Failure Strength of Composite Laminates with Unit Cell Analytic Model

Mechanical Properties Prediction of Composite Laminate with FEA and Machine Learning Coupled Method

Finite Element Analysis of Progressive Failure and Strain Localization of Carbon Fiber/Epoxy Composite Laminates by ABAQUS

Modeling and Prediction of Short/long Term Mechanical Behavior of FRP-strengthened Slabs Using Innovative Composite Finite Elements

A Better Integrated Prediction of Macroscopic Properties of Fiber Reinforced Composites Based on Finite Element Computational Micromechanics (FECM)

Progressive fracture analysis of the open-hole composite laminates: experiment and simulation

Micromechanical Prediction of Elastic-Plastic Behavior of a Short Fiber or Particle Reinforced Composite

Modeling and Characterizations of Mechanical Behaviors of Short Carbon Fiber and Short Glass Fiber Reinforced Polyetherimide Composites