Abstract:This paper presents a micromechanics-based 3D finite element model for predicting the damage initiation, propagation, and failure strength of TC33/Epoxy carbon fiber reinforced polymer (CFRP) unidirectional lamina under biaxial loadings. The finite element model is generated by introducing representative volume element (RVE) with a random distribution of fibers and a non-zero thickness, numerically identified interface phase via cohesive elements. In the finite element model, the carbon fibers are considered as elastic, while the elasto-plastic behavior and damage of the matrix are governed by extended Drucker–Prager plastic yielding model and ductile damage criterion. By imposing periodic boundary conditions to the RVEs, various cases subjected to uniaxial and biaxial loading conditions are carried out. During the combined transverse and in-plane shear stress states, a failure transition from compression- or tension-dominated to shear-dominated is captured, and the effects of the interfacial strength on the transition damage mechanisms are discussed. The corresponding failure locus is compared with the upper bound and lower bound predictions of three phenomenological failure criteria (Hashin, Tasi–Wu, and Puck failure criteria) for composites. It was found that in the interface-dominated failure of a CFRP lamina with a weak interface, the Hashin failure criterion performs best among the currently popular failure criteria. However, in the matrix-dominated failure with a strong interface, the Puck failure criterion performs best. Comparing these three criteria, it can be seen the Tsai–Wu may be generally better than both of others as it presents more neutral predictions in both of the examined cases.

The Strength Prediction of Composite Laminates Based on a Quasi-3D Finite Element Models

Fatigue life prediction of composite laminates incorporating 3D stress analysis

On Numerical Modeling and Tensile Strength of Bolted Composite Joints

Transverse Strength Prediction of Composite Materials Via Micromechanics Model

RESEARCH ON FATIGUE LIFE FOR 3D COMPOSITE LAMINATES BASED ON PROGRESSIVE DAMAGE

STRENGTH PREDICTION OF COMPOSITE LAMINATES BY FINITE ELEMENT ANALYSIS BASED ON NONLINEAR CONSTITUTIVE RELATION

Finite Element Analysis and Fatigue Life Predication of Lamination

Damage Evolution and Strength Influence Factors of Compression Loaded Composite Laminates with an Open Hole

Damage Analysis of Composite Laminate with Large Open-hole under Compression Using 3D Strain Progressive Damage Theory

On Strength Prediction of Laminated Composites

Strength Prediction of Laminated Composites Upon Independent Constituent Properties

Physically based failure analysis method for laminated composites

Prediction of Long-Term Compression Strength for Quasi-Isotropic CFRP Laminates

Static Strength Analysis of Composite Laminate Based on Delamination Damage Model

Tensile strength prediction of woven composite bonded joint

A Bridging Model Prediction of the Ultimate Strength of Composite Laminates Subjected to Biaxial Loads

Computational Micromechanics-Based Prediction of the Failure of Unidirectional Composite Lamina Subjected to Transverse and In-Plane Shear Stress States

Prediction of the Biaxial Failure Strength of Composite Laminates with Unit Cell Analytic Model

Prediction of Net-Tension Failure of Multi-Bolt Composite Joints: A Fast Approach for Laminates with Arbitrary Layup

Fatigue Life Prediction of Composite Laminates Based on Progressive Damage Analysis

An efficient micromechanics-based finite element model for failure analysis of laminated composites