Abstract:High performance engineering thermoplastics modified epoxy resins are novel materials avoiding the usual shortcomings of rubber modification (i.e., reduction of glass transition temperature, yield strength, and elastic modulus), and having improved impact strength and fracture toughness [1, 2]. Although the use of thermoplastic modifier has been important for the improvement of fracture toughness is a mechanical property high performance epoxy resins, there is limited information concerning the interfacial control between thermoplastic modifier and epoxy resins [3]. And in most cases, commercial thermoplastics are directly used as modifiers without effective control of the interface between the dispersed phase and the cured epoxy resin. There are two ways to improve the interfacial adhesion between the dispersed thermoplastics phase and the cured epoxy resin. The first is to chemically modify or functionalize the thermoplastics modifier. The second is to introduce mutual interaction, such as dipole-dipole interaction, hydrogen-bonding etc., into the curing system to improve the compatibility. Recent studies have shown that the interfacial adhesion between thermosets and thermoplastics can be dramatically improved when interdiffusion is possible [4]. Here, we prefer the second way since the development of functional polymers is still limited to the laboratory and it is a high cost process. This paper reports the incorporation effect of a second thermoplastics modifier (PC), on the phase separation behavior and morphology of PEI modified E-51 curing systems by using small angle laser light scattering (SALLS) and scanning electron microscopy (SEM, Hitachi S-570). The samples were made by incorporating various contents of polyetherimide (PEI; General Electric Co., USA) and polycarbonate (PC, based on bisphenonl-A; Idenitsu Kosan Co., Japan) into E-51 (a commercial grade epoxy resin based on diglycidyl ether of bisphenonl-A; Hangzhou Chemical Plant China) by weight. Then cured with 4,4 � diamino-diphenylsulphone (DDS; Chemical agent Co., China).

Modification of Polyetherimide by Phenylethynyl Terminated Agent for Improved Tribological, Macro- and Micro-Mechanical Properties

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Mechanical and Tribological Properties of Hybrid Fabric–modified Polyetherimide Composites

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Poly(ether Imide)s with Tailored End Groups

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Investigation of the Relationship Between Morphology and Tribological Properties of an Epoxy Resin Based on Tetraglycidyl 4,4′‐diaminodiphenylmethane Modified with Polyetherimide Oligomers

Thermal and Mechanical Properties of Ultrahigh-Molecular-Weight Ethylene/1-Hexene Copolymers Prepared by Living Polymerization with Fluorinated Bis(Phenoxy-Imine) Titanium(Iv) Catalyst

Solvent Resistant Self-Crosslinked Poly(ether Imide)

Synthesis and Characterization of Thermoplastic Polyether-imide Elastormer

Synthesis and properties of thermoplastic polyetherimide resins modified by 1,4-bis(2,3-dicarboxyphenoxy)-2- tert -butylbenzene dianhydride (3,3′-TBHQDA)

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Synthesis and comparative study of thermoplastic polyetherimides derived from hydroquinone diphthalic anhydride isomers with tert -butyl group

Preliminary investigation of a second thermoplastic modifier incorporation effect on the phase behavior and morphology of epoxy/PEI curing systems

Improved Tribological Properties of Poly(methyl methacrylate) Based Composites by the Synergistic Effect of Incorporating Ultra-High Molecular Weight Polyethylene and Heat Treatment

Polyetherimide-modified bismaleimide resins. II. Effect of polyetherimide content

Isocyanate-terminated Polyethers Toughened Epoxy Resin:Chemical Modification,Thermal Properties,and Mechanical Strength

Synthesis and comparative study on copolyetherimides from mixed isopropylidenebis(1,4-phenylene-oxy) bis(phthalic anhydride)s

Poly(ester imide)s with Low Linear Coefficients of Thermal Expansion and Low Water Uptake (VIII): Structure-Flame Retardancy Relationship

Preparation of self‐emulsifying waterborne polyamide‐imide sizing for carbon fiber and improvement on mechanical performances of carbon fiber reinforced thermoplastic polymer