Abstract:High-voltage compressed-gas capacitor is a type of precision equipment commonly used in high-voltage laboratories. The voltage dependence of capacitance, in other words, the voltage coefficient (VC) of capacitance, is an important factor to ensure the measurement accuracy of capacitors. The simplified tilting method (STM) derived from PTB, which provides a solution for measuring the VC of the high-voltage capacitor with compressed-gas coaxial cylindrical electrodes structure. However, it is not an easy work for most laboratories. In order to evaluate the VC based on the STM, a special experimental platform was developed. The high-voltage capacitor installed on the platform can be tilted and rotated at high voltage and can be remote-controlled. Based on the developed platform, the VC of a 350-kV high-voltage capacitor was measured. In order to verify, it was remeasured by the direct measurement method with a dummy high-voltage capacitor, and before that, the VC of the dummy capacitor was calibrated with a near zero-VC capacitor. The results show a good agreement, and the consistency of the measurement results is better than 1.2 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times \,\,10^{-6}$ </tex-math></inline-formula> between the two methods. Furthermore, the evaluation of measurement uncertainty in the VC determination of capacitor based on STM is introduced in detail. The evaluation results show that the expanded uncertainty is significantly better than 2.0 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times \,\,10^{-6}$ </tex-math></inline-formula> , <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$k =2$ </tex-math></inline-formula> .

Analysis On The Voltage Dependent Capacitance Variation Of High Voltage Compressed Gas Standard Capacitors

Analysis of Voltage Dependence of Standard High-Voltage Compressed Gas Capacitor

Analysis of low-electrode displacement effect on standard high-voltage compressed gas capacitor

Notice of Retraction Analysis of low-electrode displacement effect on standard high-voltage compressed gas capacitor

Measurement Uncertainty in Voltage Coefficients for Compressed-Gas Capacitor Based on a Simplified Tilting Method

Mechanical Structure for fast Voltage Coefficients Determination of Compressed-gas Capacitor with Tilting Technic

Analysis and Design in Extra High Voltage Circuit Breakers Employing Shunted Capacitors

Fimite Element Analysis of Structure Strength for High-voltage Power Capacitor Reactive Compensation Installation Frame

Research on Power Capacitor Internal Fault Criterion

Analysis and Treatment of Voltage Abnormality in a 500 Kv Capacitor Voltage Transformer

Study on the Potential Distribution of Grading Capacitor Column in UHV MOA Without Gaps

Study on the Failure Factors of Composite Insulation in High-Voltage Storage Capacitors

Study on a New Power Frequency Capacitive Voltage Transducer for Gas Insulated Substations Based on Capacitive Voltage Division

Electric Field Calculation of Capacitor Element in Arc Section by Extrapolation

Theoretical Connection from the Dielectric Constant of Films to the Capacitance of Capacitors under High Temperature

Calculation of Electric Field in Safety Film Capacitors

Analysis of Capacitive Voltage Rise During Off-Line Partial Discharge Tests on Power Transformers

Test and Simulation Analysis on the Electric Field Distribution Characteristics of UHVAC Composite Cross-arm Fittings

Measurement of DC Partial Discharge of High-voltage Storage Capacitor

Statistic Analysis of Partial Discharge for High-Voltage Storage Capacitor under DC

Effects of Typical Defects on Electrical Fields in High-Voltage (Storage) Capacitors