Abstract:Dye-sensitized solar cell (DSSC) is one of the most promising alternatives to the conventional p-n junction photovoltaic device. Here, we have explored the morphology and structure variation and the accompanying solar cell performance change of two different TiO2 beads-based photoanodes made from the same precursor. The first was synthesized hydrothermally at acidic condition whereas the second was synthesized solvothermally at slightly basic condition. The first material, referred as Bead-A with an average particle size of similar to 2.0 mu m consists of rutile and brookite TiO2 phases while the second material, Bead-B, with smaller diameter of similar to 500 nm consists solely of anatase TiO2 phase. The pertaining formation mechanisms for both materials are explored. The performances of DSSCs based on Bead-A-P25 and Bead-B-P25 bi-layer photoanodes are higher than that based on pure P25. Cell based on Bead-B showed slightly better DSSC performance than Bead-A. It becomes apparent that Bead-A is advantageous in terms of fast electron transport due to its larger particle size and the presence of 1D rutile nanorods in addition to the carbon doping. Bead-B, on the other hand, gives advantages of superior light scattering properties and high surface area for dye loading. We further improved the cell performance by combining the advantages from both materials via optimized layer arrangement. By placing larger Bead-A particles on top of the smaller Bead-B particles, the top layer suppresses carrier recombination and confines the incident light within the photoanode, essentially enhancing charge harvest and collection efficiency. The performance of DSSC based on bi-layer Bead-A and Bead-B photoanode is superior to their counterpart based on bead-P25 bi-layer films. The cell operated using this bi-layer photoanode demonstrated short-circuit current density (J(sc)) of 15.67 mA cm(-2), open circuit voltage(V-OC) of 721 mV and power conversion efficiency of 7.24%. (C) 2016 Elsevier Ltd. All rights reserved.

TiO2 Nanoparticle/nanotube Multilayer Composite Film As Photoanode Applied in Dye Sensitised Solar Cells

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Nanotube Film for Quantum Dots Sensitized Solar Cells

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Translucent TiO2 Nanotube Film for Quantum Dots Sensitized Solar Cells

Construction of TiO2 NP@TiO2 NT Double-Layered Structural Photoanode to Enhance Photovoltaic Performance of CdSe/CdS Quantum Dots Sensitized Solar Cells

ZnO/TiO2 Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Bi-layer Photoanode Films of Hierarchical Carbon-Doped Brookite-Rutile TiO2 Composite and Anatase TiO2 Beads for Efficient Dye-Sensitized Solar Cells

Rational Design Of A Tripartite-Layered Tio2 Photoelectrode: A Candidate For Enhanced Power Conversion Efficiency In Dye Sensitized Solar Cells

Improvement of performance of dye-sensitized solar cell by using composite nanoparticulate photoelectrode films

A Double Layered Photoanode Made of Highly Crystalline Tio2 Nanooctahedra and Agglutinated Mesoporous Tio2 Microspheres for High Efficiency Dye Sensitized Solar Cells

Large diameter TiO$_2$ nanotubes enable integration of conformed hierarchical and blocking layers for enhanced dye-sensitized solar cell efficiency

Application of TiO2 nanoparticles coated multi-wall carbon nanotube to dye-sensitized solar cells

Performance Improvement of Dye-Sensitized Solar Cell by Optimizing TiO<sub>2</sub>-Photoanode Structure

DSSCs Using a Nanoparticle/Nanorod Composite TiO<sub>2</sub> Film As a Photoanode

Compact TiO2 Film Photoanode for Investigating the Interlayer of Alternating Assembly Structure in Dye-sensitized Solar Cells

Effect of nickel oxide concentration on titanium oxide bilayer photoanode for dye-sensitized solar cell application

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Electrochemical synthesis of a double‐layer film of ZnO nanosheets/nanoparticles and its application for dye‐sensitized solar cells

Multifunctional Composite Photoanode Containing a TiO 2 Microarchitecture with Near-Infrared Upconversion Nanoparticles for Dye-Sensitized Solar Cells

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells