Abstract:To solve the disadvantages of traditional phase-change heat dissipation technologies, such as instability in two-phase flow and difficulty in active temperature control, a mechanical-capillary driven hybrid phase-change loop (HPCL) is designed and tested. The experiment results show that the heating power and liquid-vapor pressure difference have a decisive influence on the transformation of heat transfer modes. With the increase of heating power while maintaining the liquid-vapor pressure difference unchanged, the baseplate of evaporator undergoes four heat transfer modes, i.e. flooded, partially flooded, thin film evaporation and overheating. Among them, thin film evaporation has the significant advantages of short start-up time and high heat transfer efficiency. Meanwhile, when the baseplate temperature is maintained below 85 ℃, the heat dissipation power is enhanced by about 6.5 times if the liquid-vapor pressure difference is increased from 0 kPa to 15 kPa. Therefore, increasing the liquid-vapor pressure difference is an active means in heat transfer enhancement. The heat transfer modes distribution diagram is drawn by taking into account of power and liquid-vapor pressure difference. Transition criterions between different heat transfer modes are given. The diagram suggests that the thin film evaporation region is in the shape of "horn". In engineering application, liquid-vapor pressure difference can be regulated adaptively according to the actual operating characteristics of heat dissipation target to achieve the optimal heat dissipation effect. Furthermore, the accurate and rapid control over baseplate temperature can be realized by controlling liquid-vapor pressure difference. In such way, the accuracy of temperature control is within ± 0.5 ℃. Therefore, controlling liquid-vapor pressure difference is a simple and effective means of active temperature control.

An unsteady-state measurement method for charactering heat dissipation properties of power electronic devices

A Novel Method For On-Line Junction Temperature Measurement Of Power Modules

Unsteady Test for Steady-state Temperature Prediction of Power Devices and Accuracy Analysis

A Simplification Method for Power Device Thermal Modeling with Quantitative Error Analysis

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Transient Modelling of Loss and Thermal Dynamics in Power Semiconductor Devices

Measurement of Thermophysical Parameters and Thermal Modeling of 21,700 Cylindrical Battery

Thermal Analysis on Active Heat Dissipation Design with Embedded Flow Channels for Flexible Electronic Devices

Thermal Safety Assessment Method for Power Devices in Natural Air-Cooled Converters

A Novel Method of Accurately Characterizing Heat Pipes Using Thermoelectric Modules

Experimental Study on Thermosyphon Heat Sink for Cooling of Electronic Apparatus

A simple, accurate, and universal method for characterizing and comparing radiative cooling materials and devices

Double-sided heat dissipation numerical modeling of an embedded half-bridge power module with multiple chips

Test for Thermoelectric Self Cooling

Fast Electrothermal Estimation of Power Semiconductor Devices Based on Complex Mission Profile

Unidirectional heat and fluid transfer performances of thermal diode with fishbone-microstructure wicks

Experimental research on the thermal performance of the dry conduction plate for multi-point electronic chips

Experimental Investigation of Thermoelectric Heat Pump-Phase Change Material Thermal Control Systems

Experimental study of mechanical-capillary driven phase-change loop for heat dissipation of electronic devices and batteries

Active Peltier Effect Heat Sink for Power Semiconductor Device Thermal Stability Enhancement

Analytical Prediction of the Thermal Behavior of Semiconductor Power Devices from Room-Temperature I–V Measurements