Abstract:Carbon fiber reinforced polymer (CFRP) composites are commonly used for reflectors of artificial satellites operating in low earth orbit (LEO). The decay of the modulus of the CFRP composite varies under different thermal cycling environments, which can lead to a reduction in the accuracy of the reflector panels, affecting the transmission of signals. This paper investigates the impact of different thermal cycling conditions on the mechanical behavior of carbon fiber/epoxy laminated composites experimentally. Three kinds of thermal cycling conditions involving continuous temperature changes are employed to explore the influence of temperature range on the residual tensile and in-plane shear moduli of the laminates. Test results indicate that the upper temperature limit and the temperature span of the thermal cycling conditions jointly affect the mechanical properties of CFRP composite laminates, but the responses of the residual tensile and in-plane shear moduli are different under the variation of each temperature parameter alone. The residual tensile and in-plane shear moduli of the laminates under thermal cycling decrease with an expansion of the temperature span having the same upper limit. If the temperature span remains constant, an increase in the upper temperature limit leads to an increase in the residual tensile modulus, but a decrease in the residual in-plane shear modulus. The main damages causing the decay of residual tensile and in-plane shear moduli of unidirectional laminates were investigated by scanning electron microscopy (SEM) technology. Observations of the microscopic fracture of the material show that the post-curing reaction factor predominantly influences the residual tensile modulus of unidirectional laminates, while the fiber/matrix interface damage factor dominates the residual in-plane shear modulus of the unidirectional laminates. Furthermore, an increase in the fiber tensile modulus decreases both residual tensile and residual in-plane shear moduli. Notably, the residual in-plane shear modulus exhibits greater sensitivity to thermal cycling compared to the residual tensile modulus. The findings reported in this paper would provide valuable insights and guidance for the design and application of carbon fiber/epoxy composites subjected to thermal cycling conditions.

Effects Of Bending Cyclic Load On Mechanical Properties Of 2d Carbon Cloth Laminated C/C Composites

Synergistic effect of cyclic mechanical loading and moisture absorption on the bending fatigue performance of carbon/epoxy composites

Effect of thermo-mechanical and low-cycle preloading on the strength of carbon fiber-reinforced ceramic matrix composites

Characterization on fatigue behavior and damage mechanism of C/BMI composites experienced thermal cycling

Qualitative Separation of the Effect of Voids on the Bending Fatigue Performance of Hygrothermal Conditioned Carbon/Epoxy Composites

Flexural fatigue behavior of novel co-curing damping composite structures

Experimental investigation and multiscale simulation on the bending fatigue of 2D SiCf/SiC composites

Effect of carbon nanotubes modification on bending fatigue properties of carbon fiber reinforced polyimide composites

Longitudinal tensile analysis of carbon fiber/epoxy composites under the coupling effect of high and low temperature cycle-humidity-bending load

Effects of needle-punched felt structure on the mechanical properties of carbon/carbon composites

Tension-tension fatigue properties of multiaxial laminated carbon/epoxy composites molded by high-pressure resin transfer molding (HP-RTM) process

Ultrastable Cyclic Bending Response of Carbon Nanotube/copper Laminate Composite Film

Effects on the fatigue lives of RC beams strengthened with CFL at elevated temperature under cyclic bending loads

Bending damage behavior of 3D-C/C-TiC-Cu composite based on acoustic emission technology

Effect of interface damage on tensile behavior of fiber-reinforced ceramic-matrix composites after thermal fatigue loading

Effect of thermal cycling on the mechanical properties of Cf/Al composites

On the mechanical behavior of carbon fiber/epoxy laminates exposed in thermal cycling environments

Effects of Loading Rates on Mode I Interlaminar Fracture Toughness of Carbon/epoxy Composite Toughened by Carbon Nanotube Films

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

Effect of Thermal Cycling on the Mechanical Properties of Carbon Nanotubes Reinforced Copper Matrix Nanolaminated Composites

Effects of Carbon Fiber Architecture on the Microstructure and Mechanical Property of C/C-SiC Composites