Abstract:The aim of this study was to simulate the solidification process of beam blank continuous casting, and then find the reasons for the typical defects of the beam blank. A two-dimensional transient coupled finite element model has been developed to compute the temperature and stress profile in beam blank continuous casting. The enthalpy method was used in the heat conduction equation. The thermo-mechanical property in the mushy zone was taken into consideration in this calculation. It is shown that at the mold exit the thickness of the shell had its maximum value at the flange tip and its minimum value at the fillet. The temperature had a great fluctuation on the surface of the beam blank in the secondary cooling zone. At the unbending point, the surface temperature of the web was in the brittleness temperature range under the present condition. To ensure the quality, it is necessary to weaken the intensity of secondary cooling. At the mold exit the equivalent stress and strain have higher values at the flange tip and at the web. From the spray 1 to the unbending point, the maximum values of stress and strain gradually moved to the internal section of the flange tip and the web. However, whenever, there were bigger stress and strain values near the flange tip and the web than in the other parts, it must be very easy to generate cracks at those positions. Now, online verification of this simulation has been developed, which has proved to be very useful and efficient to instruct the practical production of beam blank continuous casting.

Three Dimensional Simulation of Solidification Process of Beam Blank Continuous Casting

Numerical Study on Temperature Behavior of Beam Blank Continuous Casting Molds

Numerical Simulation of the Thermo-Mechanical Process for Beam Blank Continuous Casting

Three-dimensional Numerical Simulation of Transient Heat Transfer with Phase Change During Continuous Casting Process of Slab

Numerical Simulation of Temperature Field in Continuous Casting of Copper Thin-Slab

Numerical Simulation of Solidification and Heat Transfer in Continuously Cast Bloom

Thermo-mechanical simulation and parameters optimization for beam blank continuous casting

3D Transient Heat Transfer Simulation and Optimization for Initial Stage of Steel Continuous Casting Process

FINITE ELEMENT ANALYSIS OF THERMO-MECHANICAL COUPLED SOLIDIFICATION PROCESS OF CONTINUOUS CASTING SLAB IN MOLD

Simulation of Coupled Fluid Flow, Heat Transfer and Solidification in Slab Continuous Casting Molds Based on Heat Flux from an Inverse Model

Numerical Simulation of Filling and Solidification of Large Complex ZTC4 Alloy Castings

Thermomechanical Analysis and Optimisation for Beam Blank Continuous Casting

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

A Three Dimensional Real-time Heat Transfer Model for Continuous Casting Blooms

Research and Development of Solidification and Heat Transfer Model for Continuous Casting of 1930mm Slab at Baosteel

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

The three-dimensioned FEM simulation analysis of the temperature field and stress field of the aluminum Ingot in the semi-continuous casting

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation

Model of Heat Transfer of Solidification in Continuously Cast Slab Based on Alternating Direction Implicit Algorithm

Three-Dimensional Thermo-Mechanical Finite Element Simulation for Casting Ladle Structure under Thermal Loadings