Abstract:Damping treatments have been extensively used as a powerful means to damp out structural resonant vibrations. Usually, damping materials are fully covered on the surface of plates. The drawbacks of this conventional treatment are also obvious due to an added mass and excess material consumption. Therefore, it is not always economical and effective from an optimization design view. In this paper, a topology optimization approach is presented to maximize the modal damping ratio of the plate with constrained layer damping treatment. The governing equation of motion of the plate is derived on the basis of energy approach. A finite element model to describe dynamic performances of the plate is developed and used along with an optimization algorithm in order to determine the optimal topologies of constrained layer damping layout on the plate. The damping of visco-elastic layer is modeled by the complex modulus formula. Considering the vibration and energy dissipation mode of the plate with constrained layer damping treatment, damping material density and volume factor are considered as design variable and constraint respectively. Meantime, the modal damping ratio of the plate is assigned as the objective function in the topology optimization approach. The sensitivity of modal damping ratio to design variable is further derived and Method of Moving Asymptote (MMA) is adopted to search the optimized topologies of constrained layer damping layout on the plate. Numerical examples are used to demonstrate the effectiveness of the proposed topology optimization approach. The results show that vibration energy dissipation of the plates can be enhanced by the optimal constrained layer damping layout. This optimal technology can be further extended to vibration attenuation of sandwich cylindrical shells which constitute the major building block of many critical structures such as cabins of aircrafts, hulls of submarines and bodies of rockets and missiles as an invaluable design tool.

Topological Optimization for Placement of Damping Material on Cylindrical Shells

Topology Optimization of Constrained Layer Damping on Plates Using Method of Moving Asymptote (MMA) Approach

Topological optimization for constrained damping in vibration control of cylindrical shell

Dynamic Performance Optimization of Cylindrical Shell with Constrained Damping Layer Using Topology

On Topology Optimization of Damping Layer in Shell Structures under Harmonic Excitations

Topologic Optimization of a Free Damping Material Based on Optimal Criteria Method

Topology Optimization of Damping Layers in Shell Structures Subject to Impact Loads for Minimum Residual Vibration

Optimization of position, size and thickness of viscoelastic damping patch for vibration reduction of a cylindrical shell structure

Topology optimization of damping layers for minimizing sound radiation of shell structures

Vibration suppression using integrated topology optimization of host structures and damping layers

Topology Optimization of Anisotropic Constrained Damping Structures Based on ESO Method

Topology optimization and tests for a short cylindrical shell with constrained layer damping

Modeling and topology optimization of cylindrical shells with partial CLD treatment

Optimal Design of Material Microstructure for Maximizing Damping Dissipation Velocity of Piezoelectric Composite Beam

Topology Optimization of Viscoelastic Damping Layers for Attenuating Transient Response of Shell Structures

Topology Optimization of Anisotropic Constrained Damping Structures

Topology optimization for minimizing frequency response of constrained layer damping plates

Topology Optimization for Free-damping Treatment under Harmonic Excitation

Topology Optimization of Microstructures of Viscoelastic Damping Materials for A Prescribed Shear Modulus

Optimal Placement of Constrained Damping Material in Structures Based on Optimality Criteria

Multi-material Topology Optimization of Viscoelastically Damped Structures under Time-Dependent Loading