Abstract:An enhanced lightness and thinness is the inevitable trend of modern industrial production, which will also lead to prominent low-frequency vibration problems in the associated structure. To solve the vibration problem of thin plate structures in various engineering fields, the active constrained layer damping (ACLD) thin plate structure is taken as the research object to study vibration control. Based on the FEM method, energy method, and Hamilton principle, the dynamic model of an ACLD thin plate structure is derived, in which the Golla–Hughes–McTavish (GHM) model is used to characterize the damping characteristics of the viscoelastic layer, and the equivalent Rayleigh damping is used to characterize the damping characteristics of the base layer. The order of the model is reduced based on the high-precision physical condensation method and balance reduction method, and the model has good controllability and observability. An LQR controller is designed to actively control the ACLD sheet, and the controller parameters and piezoelectric sheet parameters are optimized. The results show that the finite element model established in this paper is accurate under different boundary conditions, and the model can still accurately and reliably describe the dynamic characteristics of the original system in the time and frequency domain after using the joint reduction method. Under different excitation and boundary conditions, LQR control can effectively suppress structural vibration. Considering the performance and cost balance, the most suitable control parameter for the system is: Q-matrix coefficient is between 1 × 104 and 1 × 105, the R-matrix coefficient is between 1 and 10, and the thickness of the piezoelectric plate is 0.5 mm.

Optimal Design for Partial Constrained Layer Damping

ANISOTROPIC DESIGN AND ITS DAMPING ANALYSIS OF LAMINATED DAMPED STRUCTURE

Exact Solutions for a Novel H<sub>2</sub> Optimal Design of Electromagnetic Tuned Mass Damper

Topology optimization for minimizing frequency response of constrained layer damping plates

Topology optimization of constrained layer damping plates with frequency- and temperature-dependent viscoelastic core via parametric level set method

Optimum Design of Segmented Passive-Constrained Layer Damping Treatment Through Genetic Algorithms

Finite Element Modeling and Vibration Control of Plates with Active Constrained Layer Damping Treatment

Vibration and damping characteristics of sandwich plates with viscoelastic core

Constrained Layer Damping for Mitigating Vibration of a Rotating Disk-Drum Coupled Structure

Modeling and topology optimization of cylindrical shells with partial CLD treatment

Topological optimization design on constrained layer damping treatment for vibration suppression of aircraft panel via improved Evolutionary Structural Optimization

Finite element dynamic modeling and vibration reduction analysis of the double-lap bolted thin plate with partially attached constrained layer damping

Pounding tuned mass damper with constrained layer damping

Dimensionless Analysis of Segmented Constrained Layer Damping Treatments with Modal Strain Energy Method

Modal Analysis of Thin Plate Structures with Damping Treatment Using Experiment and Finite Element Method

Vibration suppression using integrated topology optimization of host structures and damping layers

Optimal Control Of Piezoelectric Laminated Parabolic Cylindrical Panels

An Approach of Constrained Damping Design and Application for the Fine Stage

Nonlinear vibration analysis of double cylindrical shells coupled structure with bolted connection and partially attached constrained layer damping

Optimal Performance of the TLCD in Structural Pitching Vibration Control

Concurrent Topology Optimization of Composite Plates for Minimum Dynamic Compliance