Abstract:<p>The conventional optimal calibration of a TLCD for suppressing structural vibration is based on the classic 2-degrees-of-freedom (2-DOF) model in terms of one specific structural mode (usually the resonant mode). For flexible multi-degrees-of-freedom (MDOF) structures, this implies that background flexibility contribution from other non-resonant modes is omitted, resulting in an unbalance in the frequency response of the flexible structure-TLCD coupled system. Furthermore, numerical search techniques are usually used for optimizing TLCDs, and extensive computational efforts are required. Therefore, in this paper a novel closed-form optimal calibration procedure accounting for the background flexibility contribution from the flexible structure is developed based on the pole-placement method. The background flexibility is represented by an equivalent stiffness that is derived from modal analysis. An analogue 2-DOF model accounting for background flexibility is developed, which turns out to be a generalization of the classic 2-DOF model. The root locus analysis is performed to derive the optimal frequency ratio of the TLCD by the equal modal damping ratio criterion. A straightforward approach for determining the optimal head loss coefficient is proposed based on the bifurcation point present in the root locus. It is seen from the closed-form formulas that the optimal parameters of the TLCD depend not only on the constructive parameters (such as the mass ratio and horizontal length ratio of a TLCD) but also on the structural inherent characteristics. Application to MDOF flexible structures are illustrated by a 10-story shear frame. Results demonstrates that the proposed calibration procedure leads to a balanced frequency response curve and thus improves the performance of the TLCD comparing with the calibration procedure ignoring background flexibility.</p>

Optimal Performance of the TLCD in Structural Pitching Vibration Control

Exact Solutions for a Novel H<sub>2</sub> Optimal Design of Electromagnetic Tuned Mass Damper

Optimized parameters of toroidal tuned liquid column dampers for multidirectional pitching vibration mitigation of structures

Parameter Optimization of Toroidal Tuned Liquid Column Dampers for Suppressing Multi-Directional Harmonic Vibration of Structures

Parameter Optimization and Control Characteristics Analysis of TLMD System Based on Phase Deviation

Optimal design of short-period structures equipped with sliding tuned liquid column damper and numerical and experimental control performance evaluation

Comparison of Performance of Different Tuned Liquid Column Dampers (TLCDs)

Closed-form optimal calibration of a tuned liquid column damper (TLCD) for flexible structures

Vibration mitigation of structures subjected to random wave forces by liquid column dampers

A semi-active toroidal TLCD for multidirectional vibration reduction of structures

Control Performance Comparison Between Tuned Liquid Damper and Tuned Liquid Column Damper Using Real-Time Hybrid Simulation

Development and validation of a nonlinear dynamic model for tuned liquid multiple columns dampers

Analytical Solutions of H2 Control and Efficiency‐based Design of Structural Systems Equipped with a Tuned Viscous Mass Damper

Tuned liquid column ball damper for seismic vibration control

Stochastic Optimal Control of Wind-Excited Tall Buildings Using Semi-Active Mr-Tlcds

Multilayer Toroidal Tuned Liquid Column Dampers for Seismic Vibration Control of Structures

Numerical Research on Nonlinear Liquid Sloshing and Vibration Control Performance of Tuned Liquid Damper

Event-triggered Semi-Active TLCD for Ground Motion-Induced Vibration Control

Effects of TLCD with maneuverable flaps on vibration control of a SDOF structure

Design and Performance Evaluation of Toroidal TLCDs in Bidirectional Seismic Control of Structures Using a Modified Dynamic Model