Abstract:The ultimate strength of a structural component can be limited in the presence of microscopic imperfections, which serve as the origin of damage process. These micro imperfections are considerably shorter than the acoustic wavelength of the frequencies normally used in ultrasonic nondestructive technique. As a result, the sensitivity of the linear acoustic characteristics (attenuation, velocity etc.) is not sufficient enough to detect the microscopic imperfections of a structure. But, these micro imperfections produce local excess nonlinearity, which is higher than the intrinsic nonlinearity of the intact structure. On the other hand, weakly or incompletely bonded interfaces (e.g., contact-type defects, cracks, debondings, delaminations and loosening in bolted joints) also exhibit highly nonlinear behavior as the contact area changes frequently when elastic waves propagate through the interface. The various nonlinear techniques for damage detection developed in the recent years are: non-linear resonant ultrasound spectroscopy (NRUS) and non-linear wave modulation spectroscopy (NWMS).The later consists of two methods, namely harmonics generation and sidebands generation. In this work a simulation study has been carried out using ANSYS Finite Element (FE) software, where the NWMS methodology is adopted for the case of a stiffened aluminum plate for different degrees of damage in the form of different delamination lengths. A damage index (DI) is defined by taking into account the relative amplitude of the harmonics or the side-bands with respect to the carrier frequency amplitude. It is found that the DI increases with the increase in delamination length.

Characterization of Damage Size in Metallic Plates Using Lamb Waves

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Nondestructive Testing Method Based on Lamb Waves for Localization and Extent of Damage

Relative reflection intensity of Lamb waves from elliptically-shaped damages in metallic plates

Lamb Wave Based Multistage Damage Detection Method

Application of Damage Detection of Metal Structure Lamb Wave Modal Superposition Imaging Based on Scanning Laser Vibration Measurement

Modeling, identification and optimization of damage deterioration in the bolted repaired metallic plate

Lamb Wave Based Total Focusing Method for Integral Grid-Stiffened Plate Damage Identification

Quantitative Damage Estimation Method Based On Lamb Waves For Transverse Damage In Composite Laminates

Damage assessment using the Lamb wave factorization method

Health Monitoring of Stiffened Metallic Plates Using Nonlinear Wave Interaction and Embedded PZT Transducers

Damage imaging identification of plate structures based on linear array near-field MUSIC algorithm

Lamb Wave-Based Damage Localization and Quantification in Composites Using Probabilistic Imaging Algorithm and Statistical Method

Transverse Damage Localization and Quantitative Size Estimation for Composite Laminates Based on Lamb Waves

Guided waves-based damage identification in plates through an inverse Bayesian process

Monitoring the Crack Growth by Measurement of Diffracted Lamb Waves

Modified minimum variance imaging of Lamb waves for damage localization in aluminum plates and composite laminates

Damage Size Estimation for Composite Laminates Based on an Anisotropic Wavefront Expression

Damage Identification in Thick Steel Beam Based on Guided Ultrasonic Waves

Damage Detection Method Based on Continuous Wavelet Transformation of Lamb Wave Signals

Damage imaging using non-contact air-coupled transducer/laser Doppler vibrometer system