Abstract:Stiffeners play a vital role in strengthening thin panels in a wide range of engineering constructions by reducing additional structural weight. However, these structures are vulnerable to issues such as interlayer delamination or skin-stiffener interfacial debonding due to high stress levels developed from external environmental conditions and operational loadings. In contrast, ultrasonic-guided wave (UGW) techniques exhibit an efficient and precise approach for monitoring discontinuities or damages in composite structures. There is a lack of research on understanding the characteristics of the interaction between UGW and interfacial debonding when in-plane edge loading and environmental factors are simultaneously taken into account. Therefore, this study is motivated by the need to develop a multiphysics numerical model which employs a commercially available finite element software, COMSOL Multiphysics®, to simulate UGW propagation in a stiffened composite plate with debonding at the plate-stiffener interface through a piezoelectric transducer under the combined influence of in-plane edge load and hygrothermal environment. The stiffened plate and piezoelectric patches are modelled with the tetrahedral element, and the bottom surface of the attached stiffener has a through-width 0.1 mm deep groove simulated for debonding. The developed FE model is validated against the results of the conducted experiments and those found in the available literature through the correlation coefficient. Further, the study conducts a comprehensive parametric investigation on stiffened cross-ply (0/90/0) laminated plates, considering variations in debonding size, in-plane load, and hygrothermal load intensity through the excitation of A0 mode. The acquired response is processed to compare the peak amplitude of various modes and energy of the waveform. Additionally, statistical indices such as normalised correlation moment (NCM) and variance of the continuous wavelet transform (CWT) peak are estimated to understand the impact of various parameters on waveform. The results show that the presence of a 90° lamina in the cross-ply laminate generates a low amplitude S0 mode in the scattered response. Moreover, a mode conversion from A0 to S0 mode is observed due to perfect bonding between the plate and the stiffener, providing insights into the bonding state in the panel. Furthermore, it is found that the magnitude of the in-plane loading marginally affects the peak amplitude of various modes in the scattered response. Additionally, when temperature intensity rises, the energy and amplitude of the UGW signals acquired through piezoelectric patches positioned in a direct line with the actuator gradually increase. The NCM value enhances with debonding regardless of exposed hygrothermal condition and reduces with increasing temperature intensity. In addition, the variance of the CWT peak reduces with debonding. The findings of this research are expected to be helpful for the development of efficient algorithms for detecting damages for structural health monitoring of stiffened composite panels.

Health Monitoring of Stiffened Metallic Plates Using Nonlinear Wave Interaction and Embedded PZT Transducers

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Health Monitoring Of Laminated Composite Plate Using Singularity Detection Of Wavelet Decomposition Signals

Damage Detection For Laminated Composite Structures With Wavelet Analysis

Nondestructive Evaluation of Material Damage Using Nonlinear Rayleigh Waves Approach

Monitoring Damage Propagation Using PZT Impedance Transducers

Nonlinear Damage Localization in Structures Using Nonlinear Vibration Modulation of Ultrasonic-Guided Waves

FEM Simulation of Nonlinear Lamb Waves for Detecting a Micro-Crack in a Metallic Plate

Nonlinear Guided Wave Tomography for Detection and Evaluation of Early-Life Material Degradation in Plates

Monitoring damage growth and topographical changes in plate structures using sideband peak count-index and topological acoustic sensing techniques

A Subharmonic Modulation-Based Approach for Debonding Damage Detection of Composite Stiffened Plates

Simulations On Monitoring And Evaluation Of Plasticity-Driven Material Damage Based On Second Harmonic Of S-0 Mode Lamb Waves In Metallic Plates

Monitoring damage in composite plates from crack initiation to macro-crack propagation combining linear and nonlinear ultrasonic techniques

Structural Health Monitoring System Based on a Concept of Lamb Wave Focusing by the Piezoelectric Array

Plasticity-driven damage detection using lamb waves for stiffened plate

On the Frequencies for Structural Health Monitoring in Plates with Symmetrical Damage: An Analytical Approach

Interaction of ultrasonic guided waves with interfacial debonding in a stiffened composite plate under variable temperature and operational conditions

Highly Non-Linear Solitary Wave Imaging Method for Detecting Cylindrical Defects in the Metal Plate of an Adhesive Composite Metal Structure

Delamination Detection and Localization in Vibrating Composite Plates and Shells Using the Inverse Finite Element Method

Characterization of surface damage of a solid plate under tensile loading using nonlinear Rayleigh waves

Micro-Crack Detection Of Nonlinear Lamb Wave Propagation In Three-Dimensional Plates With Mixed-Frequency Excitation