Abstract:The Lamb wave technique has been widely used for damage detection in plate-like structures. However, for two-dimensional (2D) defects like corrosions or one-dimensional (1D) defects like cracks, conventional Lamb wave-based methodology usually selects the detection algorithm in terms of the damage type, which is restricted if the defect remains unknown. To address the issues, this paper proposes a damage assessment approach based on the Lamb wave factorization method, which is a general method that can adapt to the detection of both 2D and 1D defects. In the process, both the forward-scattered wave across the inspection area and the wave back-scattered from the defect are used for detection, so that the enclosed rich information can be fully exploited. To measure the wave field of defect, a transducer array is firstly set around the inspection area, whose transducers would take turns to excite the Lamb wave while others remain listeners. On the basis, the scattered waves of all directions are then extracted and transformed from the time domain to frequency domain. Under a certain frequency, the inspection area is next visualized by sampling the area and solving the inverse scattering problem using the spectral data at each sampling point. By fusing the results of different frequency together, the final image can be eventually obtained. The method is then numerically investigated and also validated through experiments. The results demonstrate that it can give out the outline description of 2D defect and the size evaluation of 1D defect accurately, thus being an effective tool for damage assessment.

Quantitative Damage Estimation Method Based On Lamb Waves For Transverse Damage In Composite Laminates

Transverse Damage Localization and Quantitative Size Estimation for Composite Laminates Based on Lamb Waves

Damage Size Estimation for Composite Laminates Based on an Anisotropic Wavefront Expression

A Quantitative Damage Identification Method for Cf/Ep Composite Laminates Based on Lamb Waves

Damage Detection Method Based on Continuous Wavelet Transformation of Lamb Wave Signals

Lamb-Wave-Based Multistage Damage Detection Method Using an Active PZT Sensor Network for Large Structures.

Damage assessment in composite laminates with the Lamb wave factorization method

Lamb Wave-Based Damage Localization and Quantification in Composites Using Probabilistic Imaging Algorithm and Statistical Method

Lamb Wave Based Multistage Damage Detection Method

Nondestructive Testing Method Based on Lamb Waves for Localization and Extent of Damage

Damage Localization in Composite Laminates Based on A Quantitative Expression of Anisotropic Wavefront

Damage Localization in Composite Laminates by Building in PZT Wafer Transducers: A Comparative Study with Surface‐Bonded PZT Strategy

Damage Identification Method Based on Continuous Wavelet Transform and Mode Shapes for Composite Laminates with Cutouts

Rapid Multi-Damage Identification for Health Monitoring of Laminated Composites Using Piezoelectric Wafer Sensor Arrays

Upcoming damage size quantification in aeronautic composite structures based on imaging results post-processing

Damage assessment using the Lamb wave factorization method

Detection of damage in laminated composite structures using transverse shear mode

Curvature Shape Based Impact Damage Detection in Composite Laminates

Two-Dimensional Gapped Smoothing Method for Impact Damage Detection of Composite Laminates

Numerical simulation of Lamb wave sensing of low-velocity impact damage in composite laminate

Damage Detection Of Composite Laminates Based On Vibration Testing