Abstract:Based on the electrochemical mechanism of steel corrosion, an improved electrochemical model was established to numerically simulate the corrosion of reinforcement in concrete under marine environment. The corrosion potential distribution and current density of corroded reinforcement were deduced from the corresponding micro-environments on the surface of steel bar, including oxygen, chloride ions, temperature and relative humidity. The equilibrium of gaseous oxygen and dissolved oxygen in pore solution was considered in the model. And the diffusion of invasion mediums in cement matrix and interfacial transition zone (ITZ) were also taken into account. The anode and cathode areas on the surface of steel bar was determined by the time-varying distribution of chloride ions rather than a fixed ratio to achieve the self-balance between macrocell and microcell corrosion. The simulation results agree well with the experimental data. The numerical analysis indicates that the growth of environmental chloride ions concentration will enhance the non-uniformity of chloride ions distribution, but does not contribute much to the increase of maximum rust layer thickness on steel surface. In the propagation stage of corrosion, oxygen concentration is a key factor in controlling corrosion reactions compared to chloride ions. Moreover, environment temperature has a positive effect on both the range of active areas on surface of steel rebar and rust layer thickness.

Evolution and distribution of corrosion pits in reinforcing bars under coupled chemo-mechanical attacks

Probability-Based Performance Degradation Model and Constitutive Model for the Buckling Behavior of Corroded Steel Bars

Formation Mechanism of Corroded Surface Profile in Reinforcing Bars under Coupled Chemomechanical Attacks

Bond Strength Evaluation of Corroded Steel Bars Via the Surface Crack Width Induced by Reinforcement Corrosion

Effect of pitting corrosion on flexural performance of RC beams

Influence of Coupled Chemo-Mechanical Process on Corrosion Characteristics in Reinforcing Bars

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

A Probabilistic Model For Corrosion Prediction Of Steel Reinforcement

Probabilistic constitutive model for corroded structural steel with stochastic pits under monotonic tension

The Character and Evolution of Corrosion Pits on Steel Reinforcing Bar Surfaces Corroded by Chloride

Molecular Dynamics Simulation of Reinforcing Steel Corrosion when Subjected to Both Chloride Attack and Mechanical Loading

Non-Uniform Distribution of A Corrosion Layer at A Steel/Concrete Interface Described by A Gaussian Model

Tensile Behaviour of Pitting Corroded Steel Bars: Laboratory Investigation and Probabilistic-Based Analysis

Time-dependent reliability analysis of reinforced concrete beams subjected to bending and marine atmospheric environment

Stochastic Characteristics of Reinforcement Corrosion in Concrete Beams under Sustained Loads

Corrosion-crack path based probabilistic model to predict the durability behavior of RC components

EXPERIMENTAL STUDY OF PIEZOMAGNETISM OF PITTING CORROSIONSTEEL BARS UNDER TENSILE FORCE

A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

Modeling of Corrosion Pit Growth for Prognostics and Health Management.

Three-dimensional corrosion pit measurement and statistical mechanical degradation analysis of deformed steel bars subjected to accelerated corrosion

Cover Cracking Model in Reinforced Concrete Structures Subject to Rebar Corrosion