Abstract:Porous zinc oxide (ZnO) nanosheet (NS) arrays constructed by connected nanocrystallites were built on weaved metal wire (WMW) via hydrothermal treatment followed by calcination, and used as photoanodes for flexible dye-sensitized solar cells (DSSCs). An overall light-to-electricity conversion efficiency (h) of 2.70% was achieved for the DSSC under 100 mW cm(-2) illumination, and this h was found to be much higher than that of the DSSC with ZnO nanowire (NW) as the photoanode (0.71%). The far superior performance of the DSSC with ZnO-NS is essentially attributed to: (i) the film consisting of nanosheets with interconnected nanocrystallites can allow relatively direct pathways for the transportation of electrons as the nanosheets have a regular structure with the sheets being oriented to the electrode; (ii) the nanocrystallites assembly and porous character of the nanosheets can provide a large surface area for dye adsorption, which is in favor of enhancing the light absorption and the light propagation; (iii) the nanopores embedded in the nanosheet can act as "branch lines" for more efficient electrolyte diffusion into the interstice of the densely packed nanosheets in the array. A further improvement in the efficiency of the DSSC with ZnO-NS was achieved through the atomic layer deposition (ALD) of an ultrathin titanium oxide (TiO2) layer onto the ZnO-NS layer. The larger charge transfer resistance along with the introduction of a TiO2 shell is thought to reduce the surface recombination and thus contribute to the increase in the open circuit voltage (V-oc) of the DSCs and higher conversion efficiency (3.09%).

Growth of ZnO nanowires on fibers for one-dimensional flexible quantum dot-sensitized solar cells.

Bandgap-Graded CdSxSe1-x Nanowires for High-Performance Solar Cells

Flexible Quantum Dot-Sensitized Solar Cells with Improved Efficiencies Based on Woven Titanium Wires

ZnO nanotube-based dye-sensitized solar cell and its application in self-powered devices.

Controllable growth of dendritic ZnO nanowire arrays on a stainless steel mesh towards the fabrication of large area, flexible dye-sensitized solar cells.

In Situ Growth of Zinc Oxide Nanoribbons Within the Interstices of a Zinc Stannate Nanoplates Network on Compacted Woven Metal Wires and Their Enhanced Solar Energy Application

A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

Wire-supported CdSe nanowire array photoelectrochemical solar cells.

Flexible Organic Photovoltaics from Zinc Oxide Nanowires Grown on Transparent and Conducting Single Walled Carbon Nanotube Thin Films

Porous ZnO Nanosheet Arrays Constructed on Weaved Metal Wire for Flexible Dye-Sensitized Solar Cells.

Facile Construction of Nanofibrous Zno Photoelectrode for Dye-Sensitized Solar Cell Applications

Multiworking Electrode Flexible Fiber-Type Quantum Dot-Sensitized Solar Cells

Highly efficient and completely flexible fiber-shaped dye-sensitized solar cell based on TiO 2 nanotube array

Dye-Sensitized Solar Cells with Vertically Aligned Tio2 Nanowire Arrays Grown on Carbon Fibers

Controlled Growth of ZnO Nanowire with Application to Dye-Sensitized Solar Cells

Titanium Mesh Based Fully Flexible Highly Efficient Quantum Dots Sensitized Solar Cells

Nanorod-Nanosheet Hierarchically Structured Zno Crystals on Zinc Foil As Flexible Photoanodes for Dye-Sensitized Solar Cells

ZnO Nanosheet Arrays Constructed on Weaved Titanium Wire for CdS-sensitized Solar Cells

An All-Solid-State Fiber-Type Solar Cell Achieving 9.49% Efficiency

Flexible solar-cell from zinc oxide nanocrystalline sheets self-assembled by an in-situ electrodeposition process

One-dimensional CdS/ZnO core/shell nanofibers via single-spinneret electrospinning: tunable morphology and efficient photocatalytic hydrogen production.