Abstract:Diffusion bonding of additive manufactured (AM) metal parts to traditionally manufactured metal parts could simultaneously achieve large-scale, complex-structure, and multi-material parts. However, there is a lack of study on diffusion bonding as well as its interface formation mechanism between AM metal parts and traditionally manufactured metal parts. In this study, diffusion bonding was performed to join AM 316L stainless steel and casting 45 steel at different temperatures. The element distribution, interface characteristics and shear strength of the joints were investigated, and the interface formation mechanism at different bonding temperature was analyzed in detail. The results reveal that the interface transition zone from the AM 316L steel side to the 45 steel side is composed of the metallic elements diffusion layer and the carbide layer. Moreover, an increase in bonding temperature can effectively promote interface voids closure and increase the thickness of the metallic elements diffusion layer, while the thickness of the carbide layer firstly increases and then decreases as the temperature increases. The component of the carbide layer was identified as brittle compounds (CrFe)23C6 and (CrFe)7C3. The shear strength of the joints exhibited an increasing trend with the increasing bonding temperature. Interestingly, a sudden decrease in strength was found at 950 °C due to the significant increase of the brittle carbide layer, while high-quality joints could be achieved as the brittle carbides dissolve at 1000 °C. This study could lay the foundation for understanding diffusion bonding interface behaviors between AM metal parts and traditional casting metal parts.

Effect of Pre-Friction Surface Treatment on the Pre-Friction Assisted Diffusion Bonding of Zr55Cu30Ni5Al10 Bulk Metallic Glass to Aluminum Alloy

Diffusion Bonding of a Zr-based Metallic Glass in Its Supercooled Liquid Region

Pre-friction diffusion hybrid bonding of Zr55Cu30Ni5Al10 bulk metallic glass

Study on interface behavior of Be/CuCrZr alloy by diffusion bonding

Research on Be/CuCrZr Bonding by Hot Isostatic Pressing at Intermediate Temperature

Interface Behaviors and Mechanical Properties of Diffusion Bonded 45 Steel/additive Manufactured 316L Steel Joints

Research on the interfacial microstructure and mechanical properties of glass/Mg joint prepared by anodic bonding and vacuum diffusion bonding

Incorporation of ultrafine nanograins in Zr–Cu–Al–Ni–Co bulk metallic glass enabling significantly improved mechanical properties

Atomic-Scale Bonding of Bulk Metallic Glass to Crystalline Aluminum

Effect of Al addition on properties of Cu45Zr45.5Ti9.5 bulk metallic glass

Effect of surface roughness on interface characteristics and mechanical properties of dissimilar diffusion bonded 45 steel/additive manufactured 316L steel joints

Diffusion bonding of implantable Al2O3/Ti-13Nb-13Zr joints: Interfacial microstructure and mechanical properties

A Novel Ni-Free Zr-Based Bulk Metallic Glass with High Glass Forming Ability, Corrosion Resistance and Thermal Stability

Physical Metallurgical Bonding Layer Formed between Fe80Si9B11 Metallic Glass and Crystalline Aluminum in Rolled Composite Plate by High-Pressure Torsion at Room Temperature

Formation and mechanical properties of Cu_(58)Zr_(20)Ti_(20)Mo_2 bulk metallic glass

Effects of recrystallization and element diffusion behavior on interfacial bonding quality and mechanical properties of aluminum laminated composites

Improving the Glass Forming Ability and Plasticity of Zrcunialti Metallic Glass by Substituting Zr with Sc

Effects of Crystallization Fractions on Mechanical Properties of Zr-based Metallic Glass Matrix Composites

Study on steel-Al-20Sn nonhomogeneous diffusion bonding

EFFECTS OF THE ADDITION OF Ti OR Al ON THE WETTING BEHAVIORS AND INTERFACIAL CHARACTERISTICS OF Zr 50 Cu 50 BULK METALLIC GLASS/W SUBSTRATE

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability