Abstract:Loop heat pipe (LHP) is an advanced thermal management technology that utilizes liquid-vapor phase change and capillary action to achieve efficient heat transfer across long distances and in various directions. The start-up of an LHP is crucial for its reliable and stable operation. This study aims to explore the start-up characteristics and temperature variations of various components under different heating conditions by designing a costeffective flat plate evaporator LHP with a stainless-steel casing and acetone as the working fluid. The experimental analysis examined the performance of the LHP under varying heating powers from 28 to 60 W, positions, and gravity angles. The findings revealed that the LHP successfully started at 28 W, and a temperature overshoot occured when the heating position was near the compensation chamber. Notably, the start-up time was 400 s faster compared to the heating condition near the mean pressure chamber. When the evaporator was tilted such that the compensation chamber was above the evaporator's pressure equalization chamber, circulation within the LHP could not be established. The thermal resistance of the LHP decreased with increasing heating power, achieving a maximum reduction of 51.51 %. When both the compensation chamber and the mean pressure chamber were heated simultaneously, the impact of the gravity inclination angle on thermal resistance was minimized. This study introduces an innovative capillary wick LHP with high start-up success rates and costeffectiveness, providing both empirical data and theoretical insights for the refinement and optimization of civilian LHP designs.

Investigation on Start-up Characteristic for Evaporator in a Capillary Loop with Phase Change

Startup Characteristics of Pump-Assisted Capillary Phase Change Loop

Comparative research on the heat transfer efficiency of evaporators with different structures used in a large quick-freeze plant

Experimental Study on High-efficient Evaporator in Large Quick-freeze Equipment

Experimental Study on the Heat Transfer Performance of Pump-assisted Capillary Phase-change Loop

Visual Investigation on Startup Characteristics of a Novel Loop Heat Pipe

Experimental investigation on startup of a novel two-phase cooling loop

Startup influencing factor investigation and quantitative interaction analysis on a loop thermosyphon with multiple evaporators

The Start-Up Characteristics of a Novel Loop Heat Pipe with Stainless Steel Capillary Wick

Analysis on Relationship Between Superheat Phenomena and Startup Temperature for Two-phase Cooling System

INVESTIGATION ON HEAT TRANSFER CHARACTERISTICS OF COMPOSITE CAPILLARY EVAPORATOR

Experimental Study on the Dynamic Heat Transfer Characteristics of a Mechanically Pumped Two-phase Cooling Loop

Exploration of Dual-Phase Change Coupled Heat Transfer in Solar Regenerative Evaporator

An experimental investigation on capillary pumped loop with the meshes wick

Experimental Investigation on Startup Performances of a Separator Assisted Two-Phase Loop Thermosyphon

Experimental investigation on the start-up performance of a loop heat pipe with three flat disk evaporators combined

Stability of the Condensing Interface in a Capillary Loop with Phase Change

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Visualized Investigation of Gas–liquid Stratified Flow Boiling of Water in a Natural Circulation Thermosyphon Loop with Horizontal Arranged Evaporator

Experimental Investigation on a Loop Thermosyphon with Three Evaporators: Unique Startup and Oscillation Phenomena

Experimental study on the thermal performance of a novel two-phase loop thermosyphon under low-heat-flux conditions