Abstract:It's a significant challenge to choose a suitable heat dissipation method in different electronics assembly environments requiring different heat transfer distances. Oscillating heat pipes are promising heat exchangers, but localized dry-out during operation leads to an unstable heat transfer and limits further application of oscillating heat pipes. To extend the applicability of oscillating heat pipes, it is essential to reveal the localized dry-out characteristics under various heat transfer distances. In this study, the impact of localized dry-out on the multi-stage operating characteristics of ethanol-oscillating heat pipes with various heat transfer distances was investigated through partial visualization experiments. The anti-dry-out capacity of ethanol-oscillating heat pipes was quantitatively evaluated and compared with that of water-oscillating heat pipes. The experimental results revealed that the dry-out performance was closely related to the flow motion of the operating fluid. The stagnation of the operating fluid was the primary cause of localized dry-out. Localized dry-out deteriorated the startup and heat transfer performances of oscillating heat pipes. The anti-dry-out capacity first improved and then diminished as the heat transfer distance increased. The results also revealed that ethanol exhibited superior dry-out performance compared to water, especially at long heat transfer distances. Besides, an empirical correlation equation was fitted to evaluate the anti-dry-out capacity of oscillating heat pipes under different heat transfer distances based on the experimental results. The empirical correlation equation about the Ku number could be a reasonable predictor of the anti-dry-out capacity of oscillating heat pipes. The predicted results were in good agreement with the experimental results, with 86 % of the data deviating within +/- 20 % and an average standard deviation of 19.72 %. This research closed the gap in the prediction for the anti-dry-out capacity and provided a valuable reference to broaden the applicability of oscillating heat pipes.

Experimental Investigation on a Loop Thermosyphon with Three Evaporators: Unique Startup and Oscillation Phenomena

The Transient Response, Oscillation and Internal Flow of a Loop Thermosyphon with Dual Evaporators

The Effect of Heating Power Distribution on the Startup Time and Overshoot of a Loop Thermosyphon with Dual Evaporators

Startup influencing factor investigation and quantitative interaction analysis on a loop thermosyphon with multiple evaporators

Experimental Investigation on the Mode Transition Characteristics of a Phase-Change Thermofluidic Oscillator with External Loads

Visualized Investigation of Gas–liquid Stratified Flow Boiling of Water in a Natural Circulation Thermosyphon Loop with Horizontal Arranged Evaporator

Thermodynamic Characteristics During the Onset and Damping Processes in a Looped Thermoacoustic Prime Mover

Experimental study on the thermal performance of a novel two-phase loop thermosyphon under low-heat-flux conditions

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Two-phase Flow Oscillation and Distribution in Parallel Channels During R1233zd(E) Subcooled Flow Boiling: A Numerical Study

Experimental investigation on the heat transfer characteristics of loop thermosyphon with a micro-channel evaporator under low heat flux

Effect of Localized Dry-out on Startup and Steady-State Operation Characteristics of Ethanol-Based Oscillating Heat Pipes

Numerical and Experimental Study of a Two-Phase Thermofluidic Oscillator with Regenerator Achieving Low Temperature-Differential Oscillation

Experimental study on the effect of filling ratio on an R141b two-phase thermosyphon loop with a horizontal parallel tube evaporator

Experimental investigation on the start-up performance of a loop heat pipe with three flat disk evaporators combined

Study on the startup and heat transfer performance of loop heat pipe under sloshing conditions

Experimental Investigations of the Influence Factors for the Boiling Heat Transfer Characteristics of R134a Coolant in a Loop Thermosiphon System

Experimental investigation on the start-up performance of a novel flat loop heat pipe with dual evaporators

Experimental Study on the Dynamic Heat Transfer Characteristics of a Mechanically Pumped Two-phase Cooling Loop

Experimental study on the passive regulation of a CO2 two-phase thermosyphon loop

Experimental investigation of two-phase thermosyphon loop for passive containment cooling