Abstract:The two-phase loop thermosyphon (TPLT) with a high filling ratio is considered an efficient heat transfer device and therefore has a good application prospect in the field of high heat flux dissipation engineering. However, the heat transfer mechanism of the TPLT with high filling ratios remains elusive. In this study, we establish a computational fluid dynamics (CFD) model of the loop thermosyphon. In order to accurately simulate boiling and condensation processes, we take into account the relationship between saturation temperature and pressure in the phase change model. There were two flow patterns, i.e., the bubbly flow and the slug flow, under low filling ratios in the heating section, in which the pool boiling dominates the main heat transfer mechanism, and dropwise condensation occurred in the condensation section. The driving force to propel the liquid during the vapor bubbles rise cannot be transferred to the liquid in the right tube, resulting in lower flow velocity. In stark contrast, the single-phase flow and the bubbly flow occurred periodically in the loop thermosyphon with high filling ratios, in which the dominant heat transfer mechanism is the flow boiling. The rising bubbles promote the clockwise flow of liquid in the loop like a pump. Because of the switch of the heat transfer mechanism, the average flow velocity increased, and the thermal resistance decreased. The minimum thermal resistance was 0.15 K/W under a filling ratio of 75%, and the maximum average velocity of the fluid was 0.19 m/s. Furthermore, we found a strong coupling relationship between the heat transfer performance and the flow characteristics of the loop thermosyphon. For low filling ratios, local dry-out occurred in the loop thermosyphon under a high input heat flux, leading to an increase in the thermal resistance. For high filling ratios, the average velocity of the fluid was augmented with the increase in heating power, while the liquid was capable of being replenished quickly in the heating section to avoid the dry-out. Therefore, the loop thermosyphon with high filling ratios enables a better heat transfer performance under a high heat flux than those with low filling ratios.

The Transient Response, Oscillation and Internal Flow of a Loop Thermosyphon with Dual Evaporators

Experimental Investigation on a Loop Thermosyphon with Three Evaporators: Unique Startup and Oscillation Phenomena

Experimental Investigation on the Mode Transition Characteristics of a Phase-Change Thermofluidic Oscillator with External Loads

Visualized Investigation of Gas–liquid Stratified Flow Boiling of Water in a Natural Circulation Thermosyphon Loop with Horizontal Arranged Evaporator

The Effect of Heating Power Distribution on the Startup Time and Overshoot of a Loop Thermosyphon with Dual Evaporators

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Performance Analysis of a Separator Assisted Two-Phase Thermosyphon Based on an Experimentally Validated Model

Experimental study on the thermal performance of a novel two-phase loop thermosyphon under low-heat-flux conditions

Two-phase Flow Oscillation and Distribution in Parallel Channels During R1233zd(E) Subcooled Flow Boiling: A Numerical Study

Experimental investigation on the heat transfer characteristics of loop thermosyphon with a micro-channel evaporator under low heat flux

Experimental study on the effect of filling ratio on an R141b two-phase thermosyphon loop with a horizontal parallel tube evaporator

Experimental investigation of two-phase thermosyphon loop for passive containment cooling

Comparison of Evaporating Heat Transfer Models in Two-Phase Thermosyphon Loop

Startup influencing factor investigation and quantitative interaction analysis on a loop thermosyphon with multiple evaporators

Transient experimental and numerical study of thermosyphon under different heating fluxes and filling ratios

An Experimental Study Of Thermal Performance Of A Two-Phase Loop Thermosyphon (Tplt)-Based Steam Generator: Effects Of Thermal Boundary Conditions

Experimental and CFD investigation on the thermal performance of two phase closed thermosyphons: Effect of corrugated evaporator

Visualization and heat transfer comparative analysis of two phase closed thermosyphon

Numerical simulation on the heat transfer characteristics of two-phase loop thermosyphon with high filling ratios

Experimental study on the passive regulation of a CO2 two-phase thermosyphon loop

Experimental Investigations of the Influence Factors for the Boiling Heat Transfer Characteristics of R134a Coolant in a Loop Thermosiphon System