Abstract:This paper presents the influence of Aluminum Nitride (AlN) nanoparticles on the electrical and material properties of epoxy resin (EP). The EP/AlN nanocomposites with different concentrations of nano-AlN fillers are prepared. The dispersion of the nano-AlN particles in the composites is analyzed by a field emission scanning electron microscope (FESEM). The electrical properties are investigated by the space charge and DC conductivity measurements, whereas the material properties are studied by Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively. The results show that the homo-charge accumulation appears near both electrodes during the polarization, but there are limited negative charges left near both electrodes in the depolarization for the pure EP sample. There is no space charge accumulation in the 1 wt% and 2 wt% EP/AlN nanocomposites. The electric field distortion of the pure EP sample is 20%. Moreover, the electric field distortion initially decreases with the increase of the nano-AlN content, but it increases for the 2 wt% nano-AlN sample. Temperature has a dominant influence on the DC conductivity of the EP/AlN nanocomposites comparing to the pure EP. However, the DC conductivity of the nanocomposites becomes stable at high temperatures. It is also found that the weight loss of the samples decreases with the addition of the nano-AlN and the 1 wt% nano-AlN sample has the highest glass transition temperature. It is elucidated that the high apparent mobility and activation energy facilitate the space charge transport and suppressing the space charge accumulation. Furthermore, the nano-AlN filler can increase the trap level and trap energy density of the deep traps in the sample. The dielectric loss of the EP at high frequency is reduced with the content of 1 wt% nano-AlN. Furthermore, the addition of the nano-AlN can improve the thermal stability of the EP. The 1 wt% nano-AlN sample has the superior electrical insulation and material performance amongst the tested materials.

Fabrication and characterization of aluminum nitride polymer matrix composites with high thermal conductivity and low dielectric constant for electronic packaging

Improvement of Electrical and Material Properties of Epoxy Resin/aluminum Nitride Nanocomposites for Packaging Materials

Influences of Nanoparticle Content on Electrical and Thermal Performances of Micro‐nano Hybrid Composites for Packaging Materials

Enhanced Thermal and Dielectric Performance of Epoxy Resin/aluminum Nitride Nanocomposites at High Temperatures

Thermal and Electrical Properties of EP/AlN Nanocomposites at Different Temperatures

The Use of Polyimide-Modified Aluminum Nitride Fillers in AlN@PI/Epoxy Composites with Enhanced Thermal Conductivity for Electronic Encapsulation

Dielectric Composite Material with Enhanced Thermal Conductivity Used for Electronic Packaging

Preparation of AlN microspheres/UHMWPE composites for insulating thermal conductors

Dielectric Properties of AlN/Polymer Composites for Electronic Substrate Application

Thermal conductivity and mechanical properties of aluminum nitride filled linear low-density polyethylene composites

Preparation and Properties of AlN-Based Thermal Conductive Composites

Thermoplastic polypropylene/aluminum nitride nanocomposites with enhanced thermal conductivity and low dielectric loss

Fabrication of Morphologically Controlled Composites with High Thermal Conductivity and Dielectric Performance from Aluminum Nanoflake and Recycled Plastic Package.

Thermal and Dielectric Properties of the AlN Particles Reinforced Linear Low-Density Polyethylene Composites

Excellent Thermal Conductivity And Dielectric Properties Of Polyimide Composites Filled With Silica Coated Self-Passivated Aluminum Fibers And Nanoparticles

Aluminum Nitride/Polyimide Nanocomposite Films with High Thermal Conductivity and Low Dielectric Permittivity

Study of High Thermal Conductive and Insulating FEP/AlN Composite

Creation of A Multilayer Aluminum Coating Structure Nanoparticle Polyimide Filler for Electronic Applications

Mechanical, Thermal, and Dielectric Properties of Aluminum Nitride/glass Fiber/epoxy Resin Composites

Novel Organic–inorganic Composites with High Thermal Conductivity for Electronic Packaging Applications: A Key Issue Review

Enhanced thermal conductivity of epoxy composites by constructing aluminum nitride honeycomb reinforcements