Abstract:This paper presents the influence of Aluminum Nitride (AlN) nanoparticles on the electrical and material properties of epoxy resin (EP). The EP/AlN nanocomposites with different concentrations of nano-AlN fillers are prepared. The dispersion of the nano-AlN particles in the composites is analyzed by a field emission scanning electron microscope (FESEM). The electrical properties are investigated by the space charge and DC conductivity measurements, whereas the material properties are studied by Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively. The results show that the homo-charge accumulation appears near both electrodes during the polarization, but there are limited negative charges left near both electrodes in the depolarization for the pure EP sample. There is no space charge accumulation in the 1 wt% and 2 wt% EP/AlN nanocomposites. The electric field distortion of the pure EP sample is 20%. Moreover, the electric field distortion initially decreases with the increase of the nano-AlN content, but it increases for the 2 wt% nano-AlN sample. Temperature has a dominant influence on the DC conductivity of the EP/AlN nanocomposites comparing to the pure EP. However, the DC conductivity of the nanocomposites becomes stable at high temperatures. It is also found that the weight loss of the samples decreases with the addition of the nano-AlN and the 1 wt% nano-AlN sample has the highest glass transition temperature. It is elucidated that the high apparent mobility and activation energy facilitate the space charge transport and suppressing the space charge accumulation. Furthermore, the nano-AlN filler can increase the trap level and trap energy density of the deep traps in the sample. The dielectric loss of the EP at high frequency is reduced with the content of 1 wt% nano-AlN. Furthermore, the addition of the nano-AlN can improve the thermal stability of the EP. The 1 wt% nano-AlN sample has the superior electrical insulation and material performance amongst the tested materials.

Preparation and Properties of Polyimide/aluminum Nitride Composites

Preparation and imidization of polyimide composites filled with boron nitride

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

The Effect of Nano-Aluminum on Morphology and Properties of Polyimide Matrix Composites

Improvement of Electrical and Material Properties of Epoxy Resin/aluminum Nitride Nanocomposites for Packaging Materials

Synthesis and Electrical Properties of Polyimide-Al2o3 Composites

Preparation of AlN microspheres/UHMWPE composites for insulating thermal conductors

The Use of Polyimide-Modified Aluminum Nitride Fillers in AlN@PI/Epoxy Composites with Enhanced Thermal Conductivity for Electronic Encapsulation

Dielectric properties of polyimide/Al2O3 hybrids synthesized by in-situ polymerization

Crystallization of Polyphenylene Sulfide Reinforced with Aluminum Nitride Composite: Effects on Thermal and Mechanical Properties of the Composite

Preparation and Characterization of Polyimide/Inorganic Hybrid Film

Preparation and Thermal Effects of Polyarylene Ether Nitrile Aluminium Nitride Composites

Preparation and Performance Testing of AlN/PI Composite Film

Preparation, Morphological and Thermal Stability of Polyimide/Silica Hybrid Material Containing Dye Nbdpa

Preparation and Properties of Polyimide/ltno Composite Films with High Dielectric Constant

Fabrication and characterization of aluminum nitride polymer matrix composites with high thermal conductivity and low dielectric constant for electronic packaging

Preparation and characterization of polyimide/Al2O3 hybrid films by sol–gel process

Thermal and Dielectric Properties of the AlN Particles Reinforced Linear Low-Density Polyethylene Composites

Effect of surface modification of aluminum nitride on electrical and thermal characterizations of thermosetting polymeric nanocomposites

Excellent Thermal Conductivity And Dielectric Properties Of Polyimide Composites Filled With Silica Coated Self-Passivated Aluminum Fibers And Nanoparticles

Effects of coupling agents on structure and properties of polyimide/Al<sub>2</sub>O<sub>3</sub> nanocomposite films