Abstract:AbstractIn this article, a novel transition between substrate integrated waveguide SIW and rectangular waveguide is proposed. A pair of antipodal tapered probes is developed to convert the E-field of SIW to that of waveguide, acting as an antipodal dipole antenna to improve the performance of the SIW-to-waveguide transition. A back-to-back prototype of the proposed transition is fabricated and measured, the results show that the transition achieve a bandwidth of 51.1% from 23.7 to 40 GHz, and a size reduction of 75.3% compared to the SIW-to-waveguide transition using antipodal fin-line. A tolerance analysis is performed via the simulation to verify the reliability of this transition design. For further validation, the antipodal tapered probes are employed for the design of partially filled SIW-to-waveguide transition. From its experimental results, it demonstrates that the loss of a single SIW-to-waveguide is less than 0.26 dB over the frequency range of 24.9-40 GHz. In addition, such proposed SIW-to-waveguide transition is suitable for hermetic packaging due to the inherent property in transition structure. These results show that the proposed transition can offer the advantages of broad bandwidth, low loss, compact size, and stable performance at millimeter-wave frequencies. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:54-61, 2016.

Broadband Transition Between Waveguide and Substrate Integrated Waveguide Based on Quasi-Yagi Antenna

Low loss and broadband transition between substrate integrated waveguide and rectangular waveguide

Broadband Stripline to Rectangular Waveguide Transition

Compact Waveguide to HMSIW Transition Using Antisymmetric Tapered Probes

Compact W-band Antipodal Fin-Line Transition from SIW to Rectangular Waveguide

Wideband Transition Between Rectangular Waveguide and Microstrip Using Asymmetric Fin Line Probe

Broadband Contactless 90° Waveguide Transition with a U-Shaped Choke Groove

Compact Rectangular Waveguide to Hmsiw Transition

Ka-band Rectangular Waveguide to HMSIW Transition Based on Trapezoidal-shaped Probe

Full Ka Band Waveguide-to-Microstrip Inline Transition Design

Full Ka-Band Right-Angle Transition from Substrate Integrated Waveguide to Air-Filled Rectangular Waveguide

Novel Ka-Band Waveguide——Microstrip Transition Structure

Broadband suspended stripline to air-filled rectangular waveguide transition

Broadband Waveguide-to-Microstrip Antipodal Finline Transition Without Additional Resonance Preventer

A Full X-Band Fully 3-D Printed E-Plane Rectangular-Coax-to-Waveguide Transition

A Full Ka-Band Microstrip-to-waveguide Transition Using Tapered CPS Probe and V-antenna

Design of Coaxial to Waveguide Transitions Compatible for WR-6 and WR-4

Ka Band Transition Between Rectangular Waveguide and Substrate Integrated Waveguide

A Broadband Microstrip-to-Waveguide End-Wall Probe Transition and Its Application in Waveguide Termination

An Improved Broadband Transition Between Microstrip and Empty Substrate Integrated Waveguide

Design of Millimeter-wave Rectangular Waveguide to HMSIW Transition Based on Trapezoidal-shaped Probe