Abstract:In this article, a novel waveguide-to-microstrip transition with a built-in dc/IF return path is proposed, in which a traditional E- plane probe is directly connected to the backshort by a thin metal wire along the axis of the waveguide. The proposed waveguide-to-microstrip transition implements an additional dc/IF return path while realizing mode conversion. Moreover, the presence of the dc/IF return path has little influence on the performance of the original E- plane probe. The operating principle is analyzed by theoretical analysis and full-wave simulation, and the design procedure of the transition is also presented. To implement the proposed dc/IF return path on different substrates, two approaches, including direct integration with planar circuits or with wire bonding technology, are developed. Furthermore, two back-to-back transition prototypes working in the millimeter and submillimeter bands were designed and characterized. The measured results are in excellent agreement with the simulations. Finally, as an application example, a 70-/140-GHz unbalanced frequency doubler adopting this structure for both dc biasing and dc grounding was designed and fabricated. Measured results show that the conversion loss of the fabricated doubler is less than 13 dB in the range from 125 to 145 GHz, and the minimum conversion loss is 11 dB at 140 GHz with 100-mW input power.

A Novel Millimeter-Wave Rectangular Waveguide-Microstrip Transition Based on the Principle of Magnetic Field Coupling

A rectangular waveguide-microstrip transition based on the principle of magnetic coupling for millimeter-wave

Magnetic-Coupling Based Waveguide-to-Microstrip Transition

A Full Ka-band Microstrip-to-waveguide Transition Using Side-Inserted Magnetic Coupling Semicircular Ring

A Microstrip to Rectangular Waveguide Transition Using Coupling Loop in Millimeter-Wave Band

A Novel Waveguide-to-Coaxial Transition with Embedded Magnetic Closed Loop

Novel Ka-Band Waveguide——Microstrip Transition Structure

A Ka Band Microstrip To Waveguide Transition Using A Quasi-Triangle Probe

Full Ka Band Waveguide-to-Microstrip Inline Transition Design

A Novel Ultra-Wideband Waveguide-To-Microstrip Transition for Millimeter-Wave Applications

Compact in-line waveguide-to-microstrip coaxial probe transition for millimeter-wave

Millimeter-Wave Waveguide-to-Microstrip Transition With a Built-In DC/IF Return Path

A Full Ka-Band Microstrip-to-waveguide Transition Using Tapered CPS Probe and V-antenna

Novel Millimeter‐wave Vertical Transition Between Rectangular Waveguide and Balanced Transmission Line Using Embedded Magnetic Closed Loops

An In-Line Coaxial-to-circular Waveguide Transition at X Band

Wideband Transition Between Rectangular Waveguide and Microstrip Using Asymmetric Fin Line Probe

W‐band Inline Waveguide‐to‐coupled Microstrip Line Transition Using a Compact Differential Antenna

MILLIMETED WAVE WAVEGUIDE-TO-MICROSTRIP TRANSITION DESIGN

Waveguide-to-planar circuit transition for millimetre-wave detectors

Low-Loss Perpendicular Transition Between Rectangular Dielectric Waveguide and Microstrip Line at $W$ -Band