Abstract:Purpose This paper aims to present the design development and measurement of two aerodynamic slotted X-bands back-to-back planer substrate-integrated rectangular waveguide (SIRWG/SIW) to Microstrip (MS) line transition for satellite and RADAR applications. It facilitates the realization of nonplanar (waveguide-based) circuits into planar form for easy integration with other planar (microstrip) devices, circuits and systems. This paper describes the design of a SIW to microstrip transition. The transition is broadband covering the frequency range of 8–12 GHz. The design and interconnection of microwave components like filters, power dividers, resonators, satellite dishes, sensors, transmitters and transponders are further aided by these transitions. A common planar interconnect is designed with better reflection coefficient/return loss (RL) (S 11 /S 22 ≤ 10 dB), transmission coefficient/insertion loss (IL) (S 12 /S 21 : 0–3.0 dB) and ultra-wideband bandwidth on low profile FR-4 substrate for X-band and Ku-band functioning to interconnect modern era MIC/MMIC circuits, components and devices. Design/methodology/approach Two series of metal via (6 via/row) have been used so that all surface current and electric field vectors are confined within the metallic via-wall in SIW length. Introduced aerodynamic slots in tapered portions achieve excellent impedance matching and tapered junctions with SIW are mitered for fine tuning to achieve minimum reflections and improved transmissions at X-band center frequency. Findings Using this method, the measured IL and RLs are found in concord with simulated results in full X-band (8.22–12.4 GHz). RLC T-equivalent and p-equivalent electrical circuits of the proposed design are presented at the end. Practical implications The measurement of the prototype has been carried out by an available low-cost X-band microwave bench and with a Keysight E4416A power meter in the microwave laboratory. Originality/value The transition is fabricated on FR-4 substrate with compact size 14 mm × 21.35 mm × 1.6 mm and hence economical with IL lie within limits 0.6–1 dB and RL is lower than −10 dB in bandwidth 7.05–17.10 GHz. Because of such outstanding fractional bandwidth (FBW: 100.5%), the transition could also be useful for Ku-band with IL close to 1.6 dB.

Improved SIW Corrugated Technique With Grounded Coplanar Waveguide Transition

Single-Layer SIW Corrugated Technique for Gain Enhancement

Low loss and broadband transition between substrate integrated waveguide and rectangular waveguide

A Simple High-Gain Millimeter-Wave Leaky-Wave Slot Antenna Based on a Bent Corrugated SIW

24ghz Circular Cavity-Backed Slot Antenna Based On Corrugated Substrate Integrated Waveguides

Compact W-band Antipodal Fin-Line Transition from SIW to Rectangular Waveguide

Wideband substrate integrated waveguide cavity‐backed spiral‐shaped patch antenna

A W-Band Self-Packaged SIW-Based Slot Antenna With Gain and Bandwidth Enhancement

Aerodynamic slotted SIW-to-MS line transition using mitered end taper for satellite and RADAR communications

A W-band, Low-Cost and High-Efficiency Antenna Array Using Multilayer SIW-to-SIW Transition with Leakage-Suppressing Scheme

A Tri-Band SIW Single-Slot Antenna Fed by Asymmetric GCPW

SIW Slot Array Antenna with Non-Alternating Slot Placement for Impedance Bandwidth Enhancement

A Broadband High-Gain Circularly Polarized Wide Beam Scanning Leaky-Wave Antenna

Millimeter-wave substrate integrated waveguide long slot leaky-wave antennas and two-dimensional multibeam applications

An Improved Design of Center-Fed SIW Slot Dual-Layered Substrate Antenna

Conical Conformal Shaped-Beam Substrate-Integrated Waveguide Slot Array Antenna with Conical-to-Cylindrical Transition

A D-Band GCPW to SIW to Air-Filled RWG Cavity-Backed Transition for Integration of Communication System

Improved design for low-sidelobe non-resonant slotted waveguide antenna

Broadband Transition Between Waveguide and Substrate Integrated Waveguide Based on Quasi-Yagi Antenna

A novel design of modified I-shaped low profile broadband cavity-backed SIW slot antenna

A Method for Low Sidelobe Substrate-Integrated Waveguide Slot Antenna Design Applied for Millimeter-Wave Radars