Abstract:Purpose This paper aims to present the design development and measurement of two aerodynamic slotted X-bands back-to-back planer substrate-integrated rectangular waveguide (SIRWG/SIW) to Microstrip (MS) line transition for satellite and RADAR applications. It facilitates the realization of nonplanar (waveguide-based) circuits into planar form for easy integration with other planar (microstrip) devices, circuits and systems. This paper describes the design of a SIW to microstrip transition. The transition is broadband covering the frequency range of 8–12 GHz. The design and interconnection of microwave components like filters, power dividers, resonators, satellite dishes, sensors, transmitters and transponders are further aided by these transitions. A common planar interconnect is designed with better reflection coefficient/return loss (RL) (S 11 /S 22 ≤ 10 dB), transmission coefficient/insertion loss (IL) (S 12 /S 21 : 0–3.0 dB) and ultra-wideband bandwidth on low profile FR-4 substrate for X-band and Ku-band functioning to interconnect modern era MIC/MMIC circuits, components and devices. Design/methodology/approach Two series of metal via (6 via/row) have been used so that all surface current and electric field vectors are confined within the metallic via-wall in SIW length. Introduced aerodynamic slots in tapered portions achieve excellent impedance matching and tapered junctions with SIW are mitered for fine tuning to achieve minimum reflections and improved transmissions at X-band center frequency. Findings Using this method, the measured IL and RLs are found in concord with simulated results in full X-band (8.22–12.4 GHz). RLC T-equivalent and p-equivalent electrical circuits of the proposed design are presented at the end. Practical implications The measurement of the prototype has been carried out by an available low-cost X-band microwave bench and with a Keysight E4416A power meter in the microwave laboratory. Originality/value The transition is fabricated on FR-4 substrate with compact size 14 mm × 21.35 mm × 1.6 mm and hence economical with IL lie within limits 0.6–1 dB and RL is lower than −10 dB in bandwidth 7.05–17.10 GHz. Because of such outstanding fractional bandwidth (FBW: 100.5%), the transition could also be useful for Ku-band with IL close to 1.6 dB.

A D-Band GCPW to SIW to Air-Filled RWG Cavity-Backed Transition for Integration of Communication System

A Novel Wideband Transition from LTCC Laminated Waveguide to Air-Filled Rectangular Waveguide for W-band Applications

3D Heterogenous Integrated Wideband Switchable Bandpass Filter Bank for Millimeter Wave Applications

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

A Compact SIW Butler Matrix with Straight Delay Lines at 60 GHz

Novel Bandpass Filters by Using Cavity-Loaded Dielectric Resonators in A Substrate Integrated Waveguide

Aerodynamic slotted SIW-to-MS line transition using mitered end taper for satellite and RADAR communications

A Broadband Low-Loss SICL to Ridge Waveguide Transition for Millimeter-Wave Applications

Novel Wideband Transition Between Coplanar Waveguide and Microstrip Line

A 53–125 GHz chip to double‐ridge rectangular waveguide transition

A Broadband Coaxial Line-to-SIW Transition Using Aperture-Coupling Method

Broadband ridge waveguide to rectangular waveguide transition design in D‐band

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Three-Dimensional Interconnection With Magnetically Coupled Transition for W-Band Integration Applications

Ka Band Transition Between Rectangular Waveguide and Substrate Integrated Waveguide

A wideband fully enclosed coaxial‐to‐substrate‐integrated waveguide transition and its applications in a 1‐to‐4 radial power divider

Robust Microstrip to Empty Substrate-Integrated Waveguide Transition Using Tapered Artificial Dielectric Slab Matrix

A Broadband Inline Transition From On-PCB Microstrip to Hybrid Stack-Up Integrated Additively Fabricated Air-Filled Waveguide

Millimeter-Wave Waveguide-to-Microstrip Transition With a Built-In DC/IF Return Path