Abstract:Fiber Bragg grating (FBG) has been widely used in many fields for the measurement of temperature, strain, and other parameters, but single-mode FBG has a cross-sensitivity problem between temperature and strain. In this article, a new scheme is proposed to solve the problem by using parallel core–cladding FBGs, whose grating areas are located at the interface region of the core and cladding of the fiber. The sensing principle of parallel core–cladding FBGs for the simultaneous measurement of temperature and strain is theoretically analyzed. The femtosecond laser point-by-point method of the parallel core–cladding FBGs is experimentally investigated. Two parallel FBGs, namely, core FBG and cladding FBG, are formed efficiently and conveniently by a single time inscription. Two transmission peaks have been observed, which are excited by the core mode and the cladding mode. The experiment results demonstrated that the proposed compact sensor can detect the temperature with sensitivity of 11.043 pm/°C and strain with sensitivity of 1.2101 pm/ up to , and the relative errors of temperature and strain are less than 5.8% and 8.3%, respectively. The proposed parallel core–cladding FBGs are much more compact as one FBG element compared with the conventional structure with two cascaded FBGs or parallel FBGs. The parallel core–cladding FBGs can overcome the cross-sensitivity problem of single-mode FBG, which has great application value and potential in fiber sensing fields for dual-parameter.

Temperature Insensitive Bending Sensor Based on Microbending FBG Cladding Mode Recoupling

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Simultaneous Measurement of Knuckle Flexion and Temperature With a Few-Mode FBG

Simultaneous measurement of temperature and bend by using an eccentric core fiber Bragg grating cascaded with a Fabry-Perot cavity

Ultra-short cavity distributed bragg reflector Er-doped fiber laser for temperature-insensitive bending measurement

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Hollow Core Bragg Fiber-Based Sensor for Simultaneous Measurement of Curvature and Temperature

A Novel Microbending Optical Fiber Temperature Sensor

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Temperature-independent fiber bragg grating tilt sensor

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

Optical Fiber Sensor for Curvature and Temperature Measurement Based on Anti-Resonant Effect Cascaded with Multimode Interference

Temperature-insensitive curvature sensor with few-mode-fiber based hybrid structure

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method

Bending-Loss-Resistant Distributed Temperature and Strain Discriminative Brillouin Sensor Based on 98 mol% Germania-Doped Few-Mode Fiber

Cladding-Mode-Recoupling-Based Tilted Fiber Bragg Grating Sensor With a Core-Diameter-Mismatched Fiber Section

Light Intensity Modulation Temperature Sensor Based on U-shaped Bent Single-Mode Fiber

Temperature Response Properties of Macrobending Loss of Single-mode Fiber