Abstract:Bleached bamboo pulp, as a kind of natural cellulose, has received significant attention in the field of biomass materials due to its advantages of environmental protection and the abundance of raw materials. Low-temperature alkali/urea aqueous system is a green dissolution technology for cellulose, which has promising application prospects in the field of regenerated cellulose materials. However, bleached bamboo pulp, with high viscosity average molecular weight (Mη) and high crystallinity, is difficult to dissolve in an alkaline urea solvent system, restraining its practical application in the textile field. Herein, based on commercial bleached bamboo pulp with high Mη, a series of dissolvable bamboo pulps with suitable Mη was prepared using a method of adjusting the ratio of sodium hydroxide and hydrogen peroxide in the pulping process. Due to the hydroxyl radicals being able to react with hydroxyls of cellulose, molecular chains are cut down. Moreover, several regenerated cellulose hydrogels and films were fabricated in an ethanol coagulation bath or a citric acid coagulation bath, and the relationship between the properties of the regenerated materials and the Mη of the bamboo cellulose was systematically studied. The results showed that hydrogel/film had good mechanical properties, as the Mη is 8.3 × 104 and the tensile strength of a regenerated film and the film have values up to 101 MPa and 3.19 MPa, respectively. In this contribution, a simple method of a one-step oxidation of hydroxyl radicals to prepare bamboo cellulose with diversified Mη is presented, providing an avenue for a preparation of dissolving pulp with different Mη in an alkali/urea dissolution system and expanding the practical applications of bamboo pulp in biomass-based materials, textiles, and biomedical materials.

Pressured Hydrogen Peroxide Bleaching of Bagasse Pulp

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

Alkaline Peroxide Extrusion Pulping of Cotton Bast and Cotton Stalk

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Oxygen Delignification of Kraft Pulp of Whole Stalk Kenaf

Pozone Technology to Bleach Pulp

Effects of pectinase treatment on pulping properties and the morphology and structure of bagasse fiber

Pressure-assisted hydrothermal pretreatment for biorefinery to enhance pulp production

An approach for application of ozone bleaching and nano‐filler loading on quality of papermaking from sorghum bagasse as a promise alternative non‐wood fiber

Study on Xylanase-Aided Bleaching of Wheat Straw KP

Production of dissolving grade pulp from tobacco stalk through SO2-ethanol-water fractionation, alkaline extraction, and bleaching processes

Effluent Characteristics and Pulp Properties Changes with the Partially Substituting MgO for NaOH in the High-Consistency Retention Stage of Triploid Poplar P-RC APMP

Oxygen-assisted Ethanol Organosolv Pretreatment of Sugarcane Bagasse for Efficient Removal of Hemicellulose and Lignin

Effect of Partially Substituting MgO for NaOH on Bleaching of Pine (pinus Massoniana) Thermomechanical Pulp

On bleaching bamboo pulp preparation in Milox solvent method

One-Step Treatment for Upgrading Bleached Bamboo Pulp to Dissolving Pulp High Solvency in Green Alkali/Urea Aqueous Solution

Effect of Industrial Grade Mgo with Different Particle Sizes on the Bleaching of Poplar Chemi-Thermomechanical Pulp

Effect of alkaline hydrogen peroxide assisted with two modification methods on the physicochemical, structural and functional properties of bagasse insoluble dietary fiber

Single-Stage Pulping of Sugarcane Bagasse with Peracetic Acid

Investigation into the Synergistic Effect Between Uv/Ozone Exposure and Peroxide Pad-Batch Bleaching on the Printability of Wool

Sequential Treatment by Ozonation and Biodegradation of Pulp and Paper Industry Wastewater to Eliminate Organic Contaminants