Abstract:The solute segregation and redistribution during non-equilibrium rapid solidification using laser additive manufacturing (LAM) process directly influence the microstructure morphology and phase distribution, which in turn affects their mechanical properties. In this work, a laser micro-alloying strategy was utilized to preserve the original solidification microstructure in the considered Ti-9Mo, Ti-9Cr, Ti-9Fe, and Ti-9Ni (wt%) alloys. The addition of different β-stabilizing elements (Mo, Cr, Fe, and Ni) resulted in distinct microstructures: Ti-9Mo and Ti-9Cr alloys exhibited larger grains (∼502 μm and ∼733 μm) and cellular morphologies due to minimum constitutional undercooling at the solid-liquid interface. Because of the increased constitutional undercooling, the Ti-9Fe grains are significantly refined (∼398 μm), showing a dendritic morphology with elongated primary dendrite arms. Ti-9Ni exhibited the highest constitutional undercooling, forming equiaxed dendrites. However, due to the significant consumption of solute atoms by the interdendritic eutectic phase Ti 2 Ni, the grains did not further refine (∼396 μm). Combined with the temperature field simulation, the solidification conditions of the alloys were determined. In addition, based on the solute partitioning coefficients ( k ), the different solute redistribution and diffusion behaviors at the solid-liquid interface during the laser micro-alloying process of Ti-9Mo with k > 1 and Ti-9Cr with k < 1 were elucidated, providing essential insights into the formation of typical cellular morphology and enhanced Mo enrichment phenomenon in the Ti-9Mo alloy.

Surface Vitrification of Alloys by Laser Surface Treatment

Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing

Amorphization of Ni_（61）Nb_（39） Alloy by Laser Surface Treatment

Biocompatibility of micro/nano structures on the surface of Ti6Al4V and Ti-based bulk metallic glasses induced by femtosecond laser

Modeling nonisothermal laser amorphization: a multicomponent alloy perspective

Femtosecond laser-induced transformation mechanism from 1D groove structure to 2D microholes structure on the surface of Zr-based metallic glasses

Microstructure and Application of Surface after Laser Alloying on Surfacing Layer

Effect of Laser Surface Treatment on the Corrosion Resistance of Zircaloy-4 at High Temperature

Effects of Heat Treatments on Microstructures and Mechanical Properties of Ti6Al4V Alloy Produced by Laser Solid Forming

Properties and influence of microstructure and crystal defects in Fe2VAl modified by laser surface remelting

Understanding the solute segregation and redistribution behavior in rapidly solidified binary Ti- X alloys fabricated through non-equilibrium laser processing

Two-step laser based surface treatments of laser metal deposition manufactured Ti6Al4V components

Grain Structure and Intermetallic Evolution of Nb-containing FeCrAl Alloy Treated by Cryogenic Laser Quenching

Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy

Surface modification with Cu on Zr-based metallic glass using laser cladding and improvement of solder wettability

Enhancing the corrosion properties and microhardness of titanium alloy by laser surface remelting

Influence of laser treatment on the microstructural evolution and performance of Ti65 alloy

Effect of Laser Energy Density on Phase Evolution in Laser Surface Melted As-Cast Zr–Cu Alloy

Study on the Effect of Remelt Scanning and Heat Treatment Processes on the Structure and Properties of Laser Powder Bed Fusion Formed Al-Mg-Sc-Zr Alloys

Progress of laser surface treatment on magnesium alloy

Enhancing Surface Properties of Cu-Fe-Cr Alloys through Laser Cladding: The Role of Mo and B4C Additives