Abstract:Electrospinning fibrous membranes have attracted a great deal of attention because of their advantages, including uniform pore size, large ratio surface area, and high porosity. For extended application in lithium-ion battery, it is essential to further improve their electrochemical, mechanical, and thermal properties. In this work, a new poly (phthalazine ether sulfone ketone) (PPESK)/polyvinyli-denefluoride (PVDF) core/shell fibrous membrane was fabricated via the coaxial electrospinning technique, followed by hot press. The PPESK/PVDF membrane hot pressed at 160°C exhibits excellent comprehensive performance, including large porosity (80%), high electrolyte uptake (805%), and excellent thermal stability (at 200°C). Moreover, due to the improved bonding effect derived from the solidification of the PVDF shell layer after the hot press, the mechanical property of the membrane is effectively enhanced. The electrochemical tests also indicate that the PPESK/PVDF membrane shows larger ionic conductivity and lower interfacial resistance when compared with commercial microporous polypropylene separator. In addition, simulated cells assembled with the PPESK/PVDF membrane present superior discharge capacity, stable cycle performance, and excellent rate capability. Therefore, the hot-pressed coaxial PPESK/PVDF fibrous membrane has the potential to be a promising candidate as the separator for high-performance lithium-ion battery.

Electrochemical performances and thermal properties of electrospun Poly(phthalazinone ether sulfone ketone) membrane for lithium-ion battery

Porous polymer electrolytes with high ionic conductivity and good mechanical property for rechargeable batteries

A high-strength electrospun PPESK fibrous membrane for lithium-ion battery separator

A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion battery separator

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

Electrochemical performance and thermal property of electrospun PPESK/PVDF/PPESK composite separator for lithium-ion battery

Electrospun polyimide-based fiber membranes as polymer electrolytes for lithium-ion batteries

Ether Modified Poly(ether Ether Ketone) Nonwoven Membrane with Excellent Wettability and Stability As a Lithium Ion Battery Separator

Graphite oxide dopping polyimide nanofiber membrane via electrospinning for high performance lithium-ion batteries

Composite Polymer Electrolyte Membranes Supported by Non-Woven Fabrics for Lithium-Ion Polymer Batteries

A new strategy of PVDF based Li-salt polymer electrolyte through electrospinning for lithium battery application

Advancements in Performance Optimization of Electrospun Polyethylene Oxide-Based Solid-State Electrolytes for Lithium-Ion Batteries

Polyethylene Oxide-Coated Electrospun Polyimide Fibrous Seperator for High-Performance Lithium-Ion Battery

Sulfophenylated Poly (ether Ether Ketone Ketone) Nanofiber Composite Separator with Excellent Electrochemical Performance and Dimensional Thermal Stability for Lithium‐Ion Battery Via Electrospinning

Enhanced Mechanical Behavior and Electrochemical Performance of Composite Separator by Constructing Crosslinked Polymer Electrolyte Networks on Polyphenylene Sulfide Nonwoven Surface

High-Stability Composite Solid Polymer Electrolyte Composed of PAEPU/PP Nonwoven Fabric for Lithium-Ion Batteries

Polyvinylidene Fluoride Membrane by Novel Electrospinning System for Separator of Li-ion Batteries

Crystal structures of electrospun PVDF membranes and its separator application for rechargeable lithium metal cells

Novel electrospun PAN–PVC composite fibrous membranes as polymer electrolytes for polymer lithium-ion batteries

Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries

Investigation on PVDF-HFP microporous membranes prepared by TIPS process and their application as polymer electrolytes for lithium ion batteries