Abstract:Distribution of radial electric and temperature field is an important parameter to characterize performance of resin impregnated paper (RIP) high voltage direct current (HVDC) bushings. Moreover, it has a direct connection with long-term operation performance of bushing condenser. Ohmic heating of inner conductor and joule heating of insulation medium can establish temperature gradient inside bushing condenser. In addition, conductivity of insulation media is closely related with temperature and E-field distribution depends on conductivity under static DC application, so computation of electric and temperature field in HVDC bushing is a mutual coupling process. In the paper, cylinder model of bushing condenser was established, and derivation of semi-analytical theory formula was also conducted to achieve decoupling calculation of electric and temperature field. Based on this, finite element electro-thermal coupling model and calculation process were proposed, and the results under these two models in actual bushing structure have been compared. The results are in good agreement which proving validity of finite element electro-thermal coupling model. Then finite element model was used in cone model which is much closer to actual condenser structure. Moreover, optimization design for condenser outer contour structure was also conducted to make sure that the hottest-spot temperature is close to 90℃ under rated operating condition, and maximum radial E-field strength is approximately equal to 3.5 kV/mm and distributed uniformly. Finally, temperature rise and electrical performance test were carried out on a RIP HVDC bushing prototype, which can verify the feasibility of optimized design. The electro-thermal coupling theory and FEM model proposed in this paper, as well as electro-thermal decoupling calculation method and condenser optimization design process have good theoretical guiding significance for development of higher voltage RIP DC bushings.

Experimental Study on Electro-Thermal Coupling Model Applied in Computation of Radial Temperature Distribution of RIP Oil-Gas Bushing Condenser

Electro-thermal Coupling Model for Computation of Radial Temperature and Electric Field of Resin Impregnated Paper High Voltage Direct Current Bushing

Simulation and Experimental Analysis of Three‐dimensional Temperature Distribution of ±400‐kv Converter Transformer Valve‐side Resin Impregnated Paper Bushing under High Current

A novel dissipating heat structure of converter transformer RIP bushings based on 3-D electromagnetic-fluid-thermal analysis

3D Coupled Electromagnetic-Thermal-Fluid Method for Computation of Temperature Field of Converter Transformer RIP Bushings

Simulation Analysis on Three-Dimensional Temperature Profile of Valve-Side Resin Impregnated Paper Bushing for ± 800 kV Converter Transformer

Novel Heat Pipe Current-Carrying Tube of RIP Valve-Side Bushing in Converter Transformer

Inner insulation structure optimization of UHV RIP oil-SF6 bushing using electro-thermal simulation and advanced equal margin design method

Research on the Deterioration Process of Electrical Contact Structure Inside the ±500 Kv Converter Transformer RIP Bushings and Its Prediction Strategy

Experimental study on the electrical and thermal properties of epoxy-crepe paper composites for use in UHV DC bushing condensers

Influence of Aluminum Foil and External Conductor on the Temperature Distribution of RIP Condenser Converter Transformer Bushings

Numerical Calculation Of Static Temperature Distribution Of Transformer Bushings And Analysis Of Influential Factors

Investigation on distribution of electro-thermal coupled field and improved design of 1100 kV converter valve-side bushing

3-D Coupled Electromagnetic-Fluid-thermal Analysis of Epoxy Impregnated Paper Converter Transformer Bushings

Influence of Material Volume Conductivity on Electric Field and Surface Charge of RIP Valve-Side Bushing Core under DC Electro-Thermal Coupling Stress

Axial and Radial Temperature Distribution of the Valve Side Bushing in UHVDC Converter Transformer Under High Ambient Temperature and Large Current

Research on the Overheating Fault of HVDC Wall Bushing and Its Dignosis Strategies Based on CFD

A method for nonlinear electric-thermal coupling calculations of bushings based on unbiased gradient-free smooth domains

Electro-Thermal Coupling Field Simulation of Converter Transformer Valve Side Bushings

Research on the Temperature Rise Characteristics of Converter Transformer Valve-Side Bushing and the Prediction Model of Full State Index

A Deep-learning Surrogate Model for the Fast Calculation of Temperature Distribution of ±500kv RIP Bushings