Abstract:Distribution of radial electric and temperature field is an important parameter to characterize performance of resin impregnated paper (RIP) high voltage direct current (HVDC) bushings. Moreover, it has a direct connection with long-term operation performance of bushing condenser. Ohmic heating of inner conductor and joule heating of insulation medium can establish temperature gradient inside bushing condenser. In addition, conductivity of insulation media is closely related with temperature and E-field distribution depends on conductivity under static DC application, so computation of electric and temperature field in HVDC bushing is a mutual coupling process. In the paper, cylinder model of bushing condenser was established, and derivation of semi-analytical theory formula was also conducted to achieve decoupling calculation of electric and temperature field. Based on this, finite element electro-thermal coupling model and calculation process were proposed, and the results under these two models in actual bushing structure have been compared. The results are in good agreement which proving validity of finite element electro-thermal coupling model. Then finite element model was used in cone model which is much closer to actual condenser structure. Moreover, optimization design for condenser outer contour structure was also conducted to make sure that the hottest-spot temperature is close to 90℃ under rated operating condition, and maximum radial E-field strength is approximately equal to 3.5 kV/mm and distributed uniformly. Finally, temperature rise and electrical performance test were carried out on a RIP HVDC bushing prototype, which can verify the feasibility of optimized design. The electro-thermal coupling theory and FEM model proposed in this paper, as well as electro-thermal decoupling calculation method and condenser optimization design process have good theoretical guiding significance for development of higher voltage RIP DC bushings.

Simulation calculation and comparative analysis of three-dimensional temperature field of ultra high voltage through wall bushing under different current carrying capacity

Simulation analysis and calculation of electric field distribution characteristics of UHV wall bushing

Application of Electrothermal Coupling Field Analysis to Electric Field Distribution Calculation of ±800 kV Wall Bushing

Coupled Thermal-Electrical Analysis of 110 Kv Corrugated Aluminum Sheathed and Smooth Aluminum Sheath Cables Based on Finite Element Simulation Method

Electro-Thermal Coupling Field Simulation of Converter Transformer Valve Side Bushings

Simulation Analysis on Three-Dimensional Temperature Profile of Valve-Side Resin Impregnated Paper Bushing for ± 800 kV Converter Transformer

Investigation on distribution of electro-thermal coupled field and improved design of 1100 kV converter valve-side bushing

Electrothermal Coupling Filed Calculation of 200 kV Adaptive Bushing

Study on the Electromagnetic Thermal Coupling Analysis Method for Valve Side Bushing of Converter Transformer under Multi-frequency Harmonic Current

Investigation on distribution of electro-thermal coupling fields influenced by HVDC bushing insulation properties

Numerical Calculation Of Static Temperature Distribution Of Transformer Bushings And Analysis Of Influential Factors

Electro-thermal Coupling Model for Computation of Radial Temperature and Electric Field of Resin Impregnated Paper High Voltage Direct Current Bushing

Impact of Temperature on the Transient DC Field Distribution of ±1100 kV UHVDC Wall Bushing

Simulation and Experimental Analysis of Three‐dimensional Temperature Distribution of ±400‐kv Converter Transformer Valve‐side Resin Impregnated Paper Bushing under High Current

Research on the Temperature Rise Characteristics of Converter Transformer Valve-Side Bushing and the Prediction Model of Full State Index

Research on the dynamic characteristics of electric field distribution of the ± 1100 kV Ultra high voltage converter transformer valve‐side bushing using weakly ionised gas conductance model

Simulation Analysis of Temperature Field and Electric Field for 10 kV AC XLPE Cable in DC Operation

3‐D Thermal Analysis for the Valve‐side Bushings of HVDC Converter Transformer and Application in the Evaluation of Current‐carrying Connections Defects

Test and Simulation Analysis on the Electric Field Distribution Characteristics of UHVAC Composite Cross-arm Fittings

Application of Heat Pipe Technology on Averaging Temperature of UHV Converter Valve-Side Bushing

A method for nonlinear electric-thermal coupling calculations of bushings based on unbiased gradient-free smooth domains