Abstract:In order to determine the suitability of SS316L as a bipolar plate material in proton exchange membrane fuel cells (PEMFCs), its corrosion behavior is studied under different simulated PEMFC cathode corrosion conditions. Solutions of 1×10−5M H2SO4 with a wide range of different F− concentrations at 70°C bubbled with air are used to simulate the PEMFC cathode environment. Electrochemical methods, both potentiodynamic and potentiostatic, are employed to study the corrosion behavior. Scanning electron microscopy (SEM) is used to examine the surface morphology of the specimen after it is potentiostatic polarized under simulated PEMFC cathode environments. Auger electron spectroscopy (AES) analysis is used to identify the composition and the depth profile of the passive film formed on the SS316L surface after it is polarized in simulated PEMFC cathode environments. Photo-electrochemical (PEC) method and capacitance measurements are used to characterize the semiconductor passive films. The results of both the potentiodynamic and potentiostatic analyses show that corrosion currents increase with F− concentrations. SEM examination results indicate that pitting occurs under all the conditions studied and pitting is more severe with higher F− concentrations. From the results of AES analysis, PEC analysis and the capacitance measurements, it is determined that the passive film formed on SS316L is a bi-layer semiconductor, similar to a p–n heterojunction consisting of an external n-type iron oxide rich semiconductor layer (electrolyte side) and an internal p-type iron–chromium oxide semiconductor layer (metal side). Further analyses of the experimental results reveal the electronic structure of the passive film and shed light on the corrosion mechanisms of SS316L in the PEMFC cathode environment.

Factors Affecting Corrosion Behavior of SS316L As Bipolar Plate Material in PEMFC Cathode Environments

The Effects of Testing Conditions on Corrosion Behaviours of SS316L for Bipolar Plate of Proton Exchange Membrane Fuel Cell

A Comparative Study of Corrosion Resistance Evaluation of Bipolar Plate Materials for Proton Exchange Membrane Fuel Cell

Corrosion Characteristics of SS316L As Bipolar Plate Material in PEMFC Cathode Environments with Different Acidities

Effect of Fluoride Ions on Corrosion Behavior of SS316L in Simulated Proton Exchange Membrane Fuel Cell (PEMFC) Cathode Environments

Influence of Fluoride Ions on Corrosion Performance of 316L Stainless Steel As Bipolar Plate Material in Simulated PEMFC Anode Environments

Corrosion Behavior of SS316L in Simulated and Accelerated PEMFC Environments

The Effect of Temperature on Corrosion Behavior of SS316L in the Cathode Environment of Proton Exchange Membrane Fuel Cells

Improvement of Corrosion Resistance and Electrical Conductivity of Stainless Steel 316L Bipolar Plate by Pickling and Passivation

Effects of Passive Films on Corrosion Resistance of Uncoated SS316L Bipolar Plates for Proton Exchange Membrane Fuel Cell Application

Electrochemical corrosion characteristics of type 316 stainless steel in simulated anode environment for PEMFC

Influence of Heat Treatment on Corrosion Behaviors of 316L Stainless Steel in Simulated Cathodic Environment of Proton Exchange Membrane Fuel Cell (PEMFC)

Influences of Ph Value, Temperature, Chloride Ions and Sulfide Ions on the Corrosion Behaviors of 316L Stainless Steel in the Simulated Cathodic Environment of Proton Exchange Membrane Fuel Cell

Analysis of the Corrosion Behavior of Al Alloy Bipolar Plate for Proton Exchange Membrane Fuel Cell (PEMFC) Under Operating Thermal Conditions

Influences of plastic strain and strain rate on corrosion behavior of 316L stainless steel in simulated cathodic environment of proton exchange membrane fuel cell

Influence of pH value on the structure and electronic property of the passive film on 316L SS in the simulated cathodic environment of proton exchange membrane fuel cell (PEMFC)

Temperature-relevant Degradation in Amorphous Carbon Coated SS316L Bipolar Plates for PEMFC

Enhanced Performance of Ti-Nb-N Film Modified 316L Stainless Steel and Ti Bipolar Plates for Proton Exchange Membrane Water Electrolyser

A Carbon Corrosion Model to Evaluate the Effect of Steady State and Transient Operation of a Polymer Electrolyte Membrane Fuel Cell

Electrochemical Performance Testing and Characterization of Silver-Plated and Graphite-Coated 316l Stainless Steel Bipolar Plates

Improved anticorrosion properties and electrical conductivity of 316L stainless steel as bipolar plate for proton exchange membrane fuel cell by lower temperature chromizing treatment