Abstract:In order to determine the suitability of SS316L as a bipolar plate material in proton exchange membrane fuel cells (PEMFCs), its corrosion behavior is studied under different simulated PEMFC cathode corrosion conditions. Solutions of 1×10−5M H2SO4 with a wide range of different F− concentrations at 70°C bubbled with air are used to simulate the PEMFC cathode environment. Electrochemical methods, both potentiodynamic and potentiostatic, are employed to study the corrosion behavior. Scanning electron microscopy (SEM) is used to examine the surface morphology of the specimen after it is potentiostatic polarized under simulated PEMFC cathode environments. Auger electron spectroscopy (AES) analysis is used to identify the composition and the depth profile of the passive film formed on the SS316L surface after it is polarized in simulated PEMFC cathode environments. Photo-electrochemical (PEC) method and capacitance measurements are used to characterize the semiconductor passive films. The results of both the potentiodynamic and potentiostatic analyses show that corrosion currents increase with F− concentrations. SEM examination results indicate that pitting occurs under all the conditions studied and pitting is more severe with higher F− concentrations. From the results of AES analysis, PEC analysis and the capacitance measurements, it is determined that the passive film formed on SS316L is a bi-layer semiconductor, similar to a p–n heterojunction consisting of an external n-type iron oxide rich semiconductor layer (electrolyte side) and an internal p-type iron–chromium oxide semiconductor layer (metal side). Further analyses of the experimental results reveal the electronic structure of the passive film and shed light on the corrosion mechanisms of SS316L in the PEMFC cathode environment.

Molybdenum addition enhancing the corrosion behaviors of 316 L stainless steel in the simulated cathodic environment of proton exchange membrane fuel cell

Influence of Oxygen Content on the Corrosion Behaviour of 316 L Stainless Steel in the Simulated Cathodic Environment of Proton Exchange Membrane Fuel Cell

Influences of plastic strain and strain rate on corrosion behavior of 316L stainless steel in simulated cathodic environment of proton exchange membrane fuel cell

Influences of Ph Value, Temperature, Chloride Ions and Sulfide Ions on the Corrosion Behaviors of 316L Stainless Steel in the Simulated Cathodic Environment of Proton Exchange Membrane Fuel Cell

Influence of pH value on the structure and electronic property of the passive film on 316L SS in the simulated cathodic environment of proton exchange membrane fuel cell (PEMFC)

The Effects of Testing Conditions on Corrosion Behaviours of SS316L for Bipolar Plate of Proton Exchange Membrane Fuel Cell

Improved corrosion resistance and interfacial contact resistance of 316L stainless-steel for proton exchange membrane fuel cell bipolar plates by chromizing surface treatment

Improvement of Corrosion Resistance and Electrical Conductivity of Stainless Steel 316L Bipolar Plate by Pickling and Passivation

Enhancing the Corrosion Resistance of the 2205 Duplex Stainless Steel Bipolar Plates in PEMFCs Environment by Surface Enriched Molybdenum

Effects of Passive Films on Corrosion Resistance of Uncoated SS316L Bipolar Plates for Proton Exchange Membrane Fuel Cell Application

Influence of Heat Treatment on Corrosion Behaviors of 316L Stainless Steel in Simulated Cathodic Environment of Proton Exchange Membrane Fuel Cell (PEMFC)

A Comparative Study of Corrosion Resistance Evaluation of Bipolar Plate Materials for Proton Exchange Membrane Fuel Cell

Corrosion Characteristics of SS316L As Bipolar Plate Material in PEMFC Cathode Environments with Different Acidities

Performance of surface chromizing layer on 316L stainless steel for proton exchange membrane fuel cell bipolar plates

Corrosion Resistant Al‐Cr‐Mo Alloy Coating on Type 316L Stainless Steel Bipolar Plates for Proton Exchange Membrane Fuel Cell Applications

The Effect of Molybdenum on Chromium Deposition at (La0.8sr0.2)0.95mno3-Δ Cathode of Solid Oxide Fuel Cells

Corrosion Behavior of SS316L in Simulated and Accelerated PEMFC Environments

Improved anticorrosion properties and electrical conductivity of 316L stainless steel as bipolar plate for proton exchange membrane fuel cell by lower temperature chromizing treatment

Influence of Fluoride Ions on Corrosion Performance of 316L Stainless Steel As Bipolar Plate Material in Simulated PEMFC Anode Environments

Effect of Fluoride Ions on Corrosion Behavior of SS316L in Simulated Proton Exchange Membrane Fuel Cell (PEMFC) Cathode Environments

Electrochemical corrosion characteristics of type 316 stainless steel in simulated anode environment for PEMFC