Abstract:This study investigates the preparation of ultrahigh-strength AZ80 magnesium alloy bulks using room temperature multidirectional forging (MDF) at different strain rates. The focus is on elucidating the effects of multidirectional loading and strain rates on grain refinement and the subsequent impact on the mechanical properties of the AZ80 alloy. Unlike hot deformation, the alloy subjected to room temperature MDF exhibits a lamellar twinned structure with multi-scale interactions. The key to achieving effective room temperature MDF of the alloy lies in combining multidirectional loading with small forging strains per pass (6%). This approach not only maximizes the activation of twinning to accommodate deformation but ensures sufficient grain refinement. Microstructural analysis reveals that the evolution of the grain structure in the alloy during deformation results from the competition between {101 ̄2} twinning or twinning variant interactions and detwinning. Increasing the forging rate effectively activates more twin variants, and additional deformation passes significantly enhance twin interaction levels and dislocation density. Furthermore, at a higher strain rate, more pronounced dislocation accumulation facilitates the transformation of twin structures into high-angle grain boundaries, promoting texture dispersion and suppressing detwinning. The primary strengthening mechanisms in room temperature MDF samples are grain refinement and dislocation strengthening. While increased dislocation density raises yield strength, it reduces post-yield work hardening capacity. After two passes of MDF at a higher strain rate, the alloy achieves an optimal balance of strength and ductility, with a tensile strength of 462 MPa and an elongation of 5.1%, significantly outperforming hot-deformed magnesium alloys.

Microstructural Evolution and Mechanical Properties of ZK60 Magnesium Alloy Prepared by Multi-Axial Forging During Partial Remelting

Study on the microstructure and mechanical properties of ZK60 magnesium alloy with submicron twins and precipitates obtained by room temperature multi-directional forging

Microstructures and mechanical properties of AZ61 magnesium alloy after isothermal multidirectional forging with increasing strain rate

Simultaneously Enhanced Mechanical Properties and Damping Capacities of ZK60 Mg Alloys Processed by Multi-Directional Forging

Study on Partial Remelting Microstructures and Mechanical Properties of ZK60-RE Magnesium Alloy

Microstructural Evolution and Mechanical Properties of Extruded AZ80 Magnesium Alloy during Room Temperature Multidirectional Forging Based on Twin Deformation Mode

Investigation of microstructure and mechanical properties of ZK60 magnesium alloy achieved by extrusion-shearing process

Preparation and Mechanical Properties of ZK61-Y Magnesium Alloy Wheel Hub via Liquid Forging—Isothermal Forging Process

Simultaneously improving the deformation tolerance and mechanical properties of AZ80 magnesium alloy through the combination of pre-cryogenic and Multi-directional forging

Experimental study of squeeze casting of ZK60 magnesium alloy

Microstructures and Mechanical Properties of Az91 Magnesium Alloy Processed by Multidirectional Forging under Decreasing Temperature Conditions

Microstructure, texture evolution and yield strength symmetry improvement of as-extruded ZK60 Mg alloy via multi-directional impact forging

Effect of Rotary Forging on Microstructure and Mechanical Properties of Mg–3Al–1Zn Magnesium Alloy

Microstructure and mechanical properties of AZ61 magnesium alloy parts achieved by thixo-extruding semisolid billets prepared by new SIMA

Microstructure and Mechanical Properties of Thin ZK61 Magnesium Alloy Sheets by Extrusion and Multi–pass Rolling with Lowered Temperature

Effect of Cold Forging and Static Recrystallization on Microstructure and Mechanical Property of Magnesium Alloy AZ31

Microstructure refining and property improvement of ZK60 magnesium alloy by hot rolling

Multidirectional Forging of AZ91 Magnesium Alloy and Its Effects on Microstructures and Mechanical Properties

Influence of Secondary Extrusion on Microstructures and Mechanical Properties of ZK60 Mg Alloy Processed by Extrusion and ECAP

Dynamic precipitation and enhanced mechanical properties of ZK60 magnesium alloy achieved by low temperature extrusion

Microstructure, Texture and Mechanical Properties of AZ31 Magnesium Alloy Fabricated by High Strain Rate Biaxial Forging