Abstract:Introduction. The quality of the enrichment process is affected by many factors, ranging from the characteristics of the raw materials supplied to the enrichment plant to the enrichment technology and the agents used. Strict process control is required at all stages from mining to concentrate extraction. Copper-zinc ores of Russian deposits are difficult for enrichment due to high mass fraction of pyrite in ore and fine irregular intergrowth of sulfide minerals between themselves and with rock minerals. The practice of enrichment of copper-zinc ores has established that it is impossible to obtain high-quality zinc and pyrite concentrates without adding sphalerite flotation modifier agents to various flotation operations. To improve the flotation activity of sphalerite, copper sulphate is used as an activation additive in the enrichment process chain. Purpose of work. To study the effect of sulfhydryl collectors on flotation of sulfide minerals, and development of innovative technologies of flotation of copper-zinc and polymetallic ores considering the acidity of the environment. Materials and methods. In the experimental part of the work, several methods of materials and agents preparing were used, a variety of equipment was used, as well as methods of analysis and processing of results. The material composition and grain size distribution of sphalerite was studied using the MLA System Quanta. X-ray phase analysis of sphalerite was carried out at the University of science and technology "MISIS" in Research Laboratory of ultra-hard materials on Rigaku Geigerflex device using monochromatized CuKα-radiation. Thermographic studies were carried out using a Q -1500D derivatograph. The following flotation agents were used in the work: collector - butyl potassium xanthate, foam agent MIBC, medium regulator - lime, modifiers - iron sulfate, sodium sulphide and mixture of iron sulfate and sodium sulphide. Flotation experiments were carried out on the laboratory flotation machine FL-189 G. Results. The kinetics of sphalerite flotation is characterized not by a single value of the flotation kinetics constant for all flotation mineral grains, but by a set of such values corresponding to quite certain fractions of sphalerite extracted in the foams product. It has been found that in the initial period of flotation the mineral grains with a high value of the flotation velocity constant are flotated, and in the final period of flotation the grains of the same mineral with a low value of the same flotation velocity constant are flotated. Discussion. The introduction of iron (II) sulphate into the mineral slurry leads to a redistribution of the flocculated mineral between medium and lightly flocculated fractions. This indicates that iron (II) sulphate acts as an activator for sphalerite flotation. At a low flow rate of this agent, the proportion of medium flotable fractions increases and the proportion of easily and hardly flotable fractions decreases. With increase in the agent consumption up to 400 g/t and more, the opposite picture is observed - the proportion of medium flotable fraction decreases and the proportion of easily flotable fraction increases in flocculated sphalerite. The replacement of iron (II) sulphate by sodium sulphate has the opposite effect on the flotation spectrum of sphalerite. The introduction of a mineral suspension of a solution of sodium sulfide and iron (II) sulfate into the liquid phase at a consumption of 200 g/t of each agent leads to a decrease in the proportion of easily and especially medium floatable fractions of the mineral and an increase in the proportion of difficultly floatable fractions. Conclusions: 1. An increase in the pH of pulp liquid phase leads to a decrease in the extraction of zinc concentrate in the foam product during flotation with butyl xanthate. 2. The introduction of a solution of sodium sulfide with ferrous sulfate reduces the floatability of the mineral, which is reflected in a decrease in the extraction of zinc concentrate. 3. Sodium sulfide and iron sulphate, while simultaneously dosing them into the flotation pulp, act as depressants in the sphalerite flotation process. 4. Sodium sulfide depresses sphalerite at all studied pH concentrations. Resume. The results of the research can be useful in improving the methods for processing sulfide ores (lead-zinc and copper-zinc) which are included in the group of polymetallic ores. The developed methods of flotation processing make it possible to improve the quality of enrichment and increase the extraction of a valuable component.

Hydrothermal synthesis and flotation performance and microscopic properties of metal sulfides

The sulfidation behavior of zinc during microwave hydrothermal sulfidation of heavy metal-containing sludge

Ultrasonic pretreatment for enhancing flotation separation of elemental sulfur and silver-bearing lead minerals from an oxidative pressure leaching residue of zinc sulfide

The recovery of sulfur as ZnS particles from sulfide-contained wastewater using fluidized bed homogeneous crystallization technology

Atomic H* Enhanced Electrochemical Recovery Towards High-Value-added Metallic Sb from Complex Mine Flotation Wastewater

Production of H2S with a Novel Short-Process for the Removal of Heavy Metals in Acidic Effluents from Smelting Flue-Gas Scrubbing Systems

H2S release rate strongly affects particle size and settling performance of metal sulfides in acidic wastewater: The role of homogeneous and heterogeneous nucleation

The effect of ferrous sulfate, sodium sulfide and their mixtures on the flotation of sphalerite in the alkaline medium

Flotation Separation of High Sulfur Lead-Zinc Ore

Study on Flotability and Surface Oxidation of Sulfide Minerals from the Tailing of an Iron-Copper Mine Using Electron Probe Microanalyzer

Lead species formation on pure hemimorphite surface and its performance for subsequent sulfidization

A New Innovative Method of Flotation Separation for High Sulfur Lead–Zinc Sulfide Ore

Experimental Study on Activated Sulfur Selection from High Alkalinity Lead Zinc Flotation Tailings

Utilization of Flotation Wastewater for Separation of Chalcopyrite and Molybdenite by Selective Surface Passivation

Microwave Hydrothermal Sulfidation Process for Zinc-Containing Plating Sludge

Enhancing the Flotation Separation of Galena and Pyrite in the Presence of Seawater

Improved flotation separation of sulfide minerals by synthesized surfactant based on para-position methyl effect

Rich surface hydroxyl design for nanostructured TiO2 and its hole-trapping effect

Mineralogical characteristics of copper smelting slag affecting the synchronous flotation enrichment of copper and arsenic

Surface modification mechanism of galena with H2SO4 and its effect on flotation separation performance

Flotation behavior and mechanism of smithsonite under the system of bidentate ligand sulfide sodium thiocyanate